Hi all, I’m going nuts here trying to get my AAA set up on an NCS. The goal is to authenticate against TACACS on VTY lines but either use the local user database or line/enable for console access and I cannot get it right. Sometimes my VTY authentication fails the first time and it requires you to put in your password a second time, even though the TACACS servers are definitely available. I cannot get console access to work properly at all. I’m running XR 7.1.1. Here’s the aaa portion of the config:
tacacs source-interface Loopback1 vrf default tacacs-server host 192.168.45.126 port 49 key 7 ****** single-connection ! tacacs-server host 192.168.46.126 port 49 key 7 ****** timeout 3 single-connection ! username admin group root-lr group cisco-support secret 10 $secretpass ! aaa group server tacacs+ TACACS server 192.168.45.126 server 192.168.46.126 ! aaa authorization exec CONSOLE local aaa authorization exec default group TACACS local aaa authentication login CONSOLE local line aaa authentication login default group TACACS line! ! line console password 7 ****** authorization exec CONSOLE login authentication CONSOLE ! line default password 7 ****** timeout login response 30 authorization exec default login authentication default exec-timeout 0 0 access-class ingress access-protect session-timeout 120 transport input ssh ! I’ve tried different permutations of the line console config and can’t get the right combination. Can someone point me in the right direction here? Thanks in advance, evt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
