On Fri, 18 Dec 2020 at 22:07, Jakob Heitz (jheitz) via cisco-nsp <cisco-nsp@puck.nether.net> wrote:
> Testing the RPKI validity in route-map causes BGP REFRESH messages. > Lots of them. I think the community largely got blindsided by this, I suspect marketability of the whole solution would have been a lot poorer if this argument was thrown around at standardisation. However, that ship has sailed, we can implement new cheaper methods, but the damage is done and it will be there long after we've retired. I know I got blindsided, and it was so obvious, but not a problem I was aware until a customer complained about excessive refresh. It would be funny to analyse how much more wattage is drawn because of this globally. how many early control-plane upgrades. Is it immaterial or material? I don't know. But it does seem to put some customers control-planes over the edge. -- ++ytti _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
