I've seen ASR920s do a Y.1564 test over L2, but never an L3 iPerf test. Are you attempting to prove (or disprove) a circuit?
Some digging shows this document Y.1564 Capabilities of ASR920 (cisco.com) <https://www.cisco.com/c/dam/en/us/products/collateral/routers/asr-920-series-aggregation-services-router/y1564-capabilities-asr920.pdf> - Thomas Scott | mr.thomas.sc...@gmail.com On Fri, Jan 15, 2021 at 10:04 AM Shawn L <sh...@rmrf.us> wrote: > Does anyone know if there's a way to do basic speed testing to / from an > ASR920? I know you used to be able to use ttcp on some cisco routers to do > basic testing, but it doesn't seem to be available on the 920. > > Or, if there's a way to do any sort of link speed testing between 2 > ASR920s? > > I have a circuit that may or may not be performing correctly, but I'd like > to do some basic testing before I have to send a technician with an > ethernet tester to do rfc2544 (or Y.1564) tests. > > Thanks > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/