Howdy, Sorry for the noise but I have run into a little confusion surrounding how NXOS does BFD.
I noticed that BFD wasn't establishing between two switches while there was an iACL attached to an interface and when I checked into the traffic that was getting blocked I noticed this: Acl: %ACL-6-IPACCESS: list TESTv4 Vlan1061 denied udp 192.168.1.194(49254) -> 192.168.1.194(3785) Acl: %ACL-6-IPACCESS: list TESTv4 Vlan1061 denied udp 192.168.1.194(49254) -> 192.168.1.194(3785) Does anyone know why if NXOS is trying to communicate with itself it would try to accomplish this by sending the traffic through the remote device? I can really easily resolve this by just adding another line to the ACL but I would much rather understand how this traffic is ending up on the wire in the first place. Thanks, -Drew _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
