Send cisco-voip mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."
Today's Topics:
1. Tcl script for explicit call transfer/tbct (Roger Wiklund)
2. IPv6 and Voice.... (Scott Voll)
3. Re: UCCX call redirect to PSTN fails (Mike )
4. Re: UCCX call redirect to PSTN fails (Paul)
----------------------------------------------------------------------
Message: 1
Date: Fri, 30 Nov 2012 22:27:22 +0100
From: Roger Wiklund <[email protected]>
To: Cisco VOIP <[email protected]>
Subject: [cisco-voip] Tcl script for explicit call transfer/tbct
Message-ID:
<cac+ask1bufj3ra8eiu5xyix0--nvi7w_t_zd0lzecob9jq1...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Hi
My understand is that you need a Tcl script to run 2 B-Channel
Transfer/ECT/Release to switch etc. Has anyone successfully enabled
this, and if so can you share the Tcl script?
Thanks
/Roger
------------------------------
Message: 2
Date: Fri, 30 Nov 2012 13:32:10 -0800
From: Scott Voll <[email protected]>
To: "[email protected]" <[email protected]>
Subject: [cisco-voip] IPv6 and Voice....
Message-ID:
<CAHgd+3-k=+P_Zys6EE=4p64pn4ggtjsvechev1xrdknjwzd...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Anyone running there voice on IPv6?
Comments?
Migration path?
I understand that UCCx still does not support it, but what about the other
app's? CM? UC? CER? CUPS? etc.
TIA
Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20121130/626a8a70/attachment-0001.html>
------------------------------
Message: 3
Date: Fri, 30 Nov 2012 17:21:00 -0500
From: "Mike " <[email protected]>
To: "'Ryan LaFountain \(rlafount\)'" <[email protected]>, "'Paul'"
<[email protected]>, <[email protected]>
Subject: Re: [cisco-voip] UCCX call redirect to PSTN fails
Message-ID: <[email protected]>
Content-Type: text/plain; charset="us-ascii"
Just an FYI for folks that might run into this problem.
I was using local route groups and created a device pool for my gateways and
non-phone devices. The CCX triggers and port group were in this device pool.
Once I specified a local gateway for this device all worked fine.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Ryan LaFountain
(rlafount)
Sent: Friday, November 30, 2012 8:09 AM
To: Mike; 'Paul'; [email protected]
Subject: Re: [cisco-voip] UCCX call redirect to PSTN fails
Hi Mike,
The default debugging should be enough to give you an idea of why the
redirect is failing. If you grab the UCCX Engine (MIVR) logs, send them to
me with the time of the call and the calling number (ANI) and I'll help you
take a look.
Thank you,
Ryan LaFountain
Unified Contact Center
Cisco Services
Direct: +1 919 392 9898
Email: [email protected]
Hours: M - F 9:00am - 5:00pm
On 11/29/12 9:49 PM, "Mike " <[email protected]> wrote:
>What debug level? I'm new to 8.x
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Paul
>Sent: Thursday, November 29, 2012 9:32 PM
>To: Mike; [email protected]
>Subject: Re: [cisco-voip] UCCX call redirect to PSTN fails
>
>In that case, you'd best start digging through the MIVR logs on your
>UCCX box with Notepad++. Set the appropriate trace levels on your UCCX
>cluster or single server for MIVR and attempt the call again. The MIVR
>logs are very handy in explaining exactly why it's not succeeding
>during that step. Make sure to note the time you make the call so you
>don't have to dig through lines of unrelated debug.
>
>
>----- Original Message -----
>From: Mike <[email protected]>
>To: 'Paul' <[email protected]>; [email protected]
>Cc:
>Sent: Thursday, November 29, 2012 5:07 PM
>Subject: RE: [cisco-voip] UCCX call redirect to PSTN fails
>
>It doesn't even make it to the gateway immediately goes to the
>"unsuccessful" step under redirect.
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Paul
>Sent: Thursday, November 29, 2012 8:04 PM
>To: Mike; [email protected]
>Subject: Re: [cisco-voip] UCCX call redirect to PSTN fails
>
>If you're getting a "Your call cannot be completed as dialed, please
>check the..." error then your problem is going to be, more likely than
>not, a class of service problem. Does the call even reach the gateway
>on the transfer when you call from the outside? Check with 'deb voice
>ccsip messages' if using SIP or 'deb isdn q931' if you're using T1 PRI
>with MGCP or H.323.
>
>Depending on the gateway protocol you're using, you can setup detailed
>traces for SIP/MGCP/(H.225/H.245) on your cluster, gather appropriate
>call processing logs using RTMT, and do further analysis using
>Notepad++ or better yet use TranslatorX.
>
>________________________________
>From: Mike <[email protected]>
>To: [email protected]
>Sent: Thursday, November 29, 2012 4:50 PM
>Subject: [cisco-voip] UCCX call redirect to PSTN fails
>
>
>Hey all,
>
>I have a odd problem. I have a script that redirects the call the PSTN
>for on-call purposes and it works fine if you call from an internal
>line, but an outside line it fails.
>
>I have the CTI triggers and call control group with UCCX_CSS that has
>long distance and local partitions for PSTN access.
>
>Which log can I check to see why its failing?
>
>Thanks,
>Mike
>_______________________________________________
>cisco-voip mailing list
>[email protected]
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>_______________________________________________
>cisco-voip mailing list
>[email protected]
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>_______________________________________________
>cisco-voip mailing list
>[email protected]
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>_______________________________________________
>cisco-voip mailing list
>[email protected]
>https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
Message: 4
Date: Fri, 30 Nov 2012 14:39:34 -0800 (PST)
From: Paul <[email protected]>
To: Mike <[email protected]>, "'Ryan LaFountain \(rlafount\)'"
<[email protected]>, "[email protected]"
<[email protected]>
Subject: Re: [cisco-voip] UCCX call redirect to PSTN fails
Message-ID:
<[email protected]>
Content-Type: text/plain; charset=us-ascii
Did the MIVR logs tell you this or did you discover this another way?
----- Original Message -----
From: Mike <[email protected]>
To: 'Ryan LaFountain (rlafount)' <[email protected]>; 'Paul'
<[email protected]>; [email protected]
Cc:
Sent: Friday, November 30, 2012 2:21 PM
Subject: RE: [cisco-voip] UCCX call redirect to PSTN fails
Just an FYI for folks that might run into this problem.
I was using local route groups and created a device pool for my gateways and
non-phone devices. The CCX triggers and port group were in this device pool.
Once I specified a local gateway for this device all worked fine.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Ryan LaFountain
(rlafount)
Sent: Friday, November 30, 2012 8:09 AM
To: Mike; 'Paul'; [email protected]
Subject: Re: [cisco-voip] UCCX call redirect to PSTN fails
Hi Mike,
The default debugging should be enough to give you an idea of why the
redirect is failing. If you grab the UCCX Engine (MIVR) logs, send them to
me with the time of the call and the calling number (ANI) and I'll help you
take a look.
Thank you,
Ryan LaFountain
Unified Contact Center
Cisco Services
Direct: +1 919 392 9898
Email: [email protected]
Hours: M - F 9:00am - 5:00pm
On 11/29/12 9:49 PM, "Mike " <[email protected]> wrote:
>What debug level? I'm new to 8.x
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Paul
>Sent: Thursday, November 29, 2012 9:32 PM
>To: Mike; [email protected]
>Subject: Re: [cisco-voip] UCCX call redirect to PSTN fails
>
>In that case, you'd best start digging through the MIVR logs on your
>UCCX box with Notepad++. Set the appropriate trace levels on your UCCX
>cluster or single server for MIVR and attempt the call again. The MIVR
>logs are very handy in explaining exactly why it's not succeeding
>during that step. Make sure to note the time you make the call so you
>don't have to dig through lines of unrelated debug.
>
>
>----- Original Message -----
>From: Mike <[email protected]>
>To: 'Paul' <[email protected]>; [email protected]
>Cc:
>Sent: Thursday, November 29, 2012 5:07 PM
>Subject: RE: [cisco-voip] UCCX call redirect to PSTN fails
>
>It doesn't even make it to the gateway immediately goes to the
>"unsuccessful" step under redirect.
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Paul
>Sent: Thursday, November 29, 2012 8:04 PM
>To: Mike; [email protected]
>Subject: Re: [cisco-voip] UCCX call redirect to PSTN fails
>
>If you're getting a "Your call cannot be completed as dialed, please
>check the..." error then your problem is going to be, more likely than
>not, a class of service problem. Does the call even reach the gateway
>on the transfer when you call from the outside? Check with 'deb voice
>ccsip messages' if using SIP or 'deb isdn q931' if you're using T1 PRI
>with MGCP or H.323.
>
>Depending on the gateway protocol you're using, you can setup detailed
>traces for SIP/MGCP/(H.225/H.245) on your cluster, gather appropriate
>call processing logs using RTMT, and do further analysis using
>Notepad++ or better yet use TranslatorX.
>
>________________________________
>From: Mike <[email protected]>
>To: [email protected]
>Sent: Thursday, November 29, 2012 4:50 PM
>Subject: [cisco-voip] UCCX call redirect to PSTN fails
>
>
>Hey all,
>
>I have a odd problem. I have a script that redirects the call the PSTN
>for on-call purposes and it works fine if you call from an internal
>line, but an outside line it fails.
>
>I have the CTI triggers and call control group with UCCX_CSS that has
>long distance and local partitions for PSTN access.
>
>Which log can I check to see why its failing?
>
>Thanks,
>Mike
>_______________________________________________
>cisco-voip mailing list
>[email protected]
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>_______________________________________________
>cisco-voip mailing list
>[email protected]
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>_______________________________________________
>cisco-voip mailing list
>[email protected]
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>_______________________________________________
>cisco-voip mailing list
>[email protected]
>https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
End of cisco-voip Digest, Vol 110, Issue 1
******************************************
