Your limited to 5 total. So you can create new/replace using Directory URI, then later Delete the old ldap agreement with no issues. End users take awhile to go inactive. Search on the 3:15am garbage collection. Keep your eye out that no one goes Inactive ☺ Run the user export as a backup just in case.
https://supportforums.cisco.com/thread/2206208 From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Lelio Fulgenzi Sent: Tuesday, March 04, 2014 2:12 PM To: Erick B. Cc: cisco-voip voyp list Subject: Re: [cisco-voip] Directory URI in LDAP sync Just following up on this Erick... After upgrading from v7 to v9, the Directory URI field is blank as you suggest. I thought I could simply add another host in the existing relationship, but that does not work. It looks like I have to create a new directory relationship. Is it dangerous to create two directory relationships to the same active directory source? Lelio --- Lelio Fulgenzi, B.A. Senior Analyst, Network Infrastructure Computing and Communications Services (CCS) University of Guelph 519‐824‐4120 Ext 56354 le...@uoguelph.ca<mailto:le...@uoguelph.ca> www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1 ________________________________ From: "Erick B." <erick...@gmail.com<mailto:erick...@gmail.com>> To: "Lelio Fulgenzi" <le...@uoguelph.ca<mailto:le...@uoguelph.ca>> Cc: "cisco-voip voyp list" <cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> Sent: Monday, November 18, 2013 2:46:57 PM Subject: Re: [cisco-voip] Directory URI in LDAP sync After upgrade from 8.x to 9.x, the field is not mapped to LDAP attribute (is blank). You need to add new LDAP directory entry to get that field mapped or go under Call Routing -> Directory Number and Directory URI and set each DN and Directory URI setting there. The SIP URI is used for telepresence mainly so people call you at use...@domainname.com<mailto:use...@domainname.com> from a video device. Still learning this... On Mon, Nov 18, 2013 at 11:27 AM, Lelio Fulgenzi <le...@uoguelph.ca<mailto:le...@uoguelph.ca>> wrote: Can anyone comment/elaborate on what the Directory URI is used for in the LDAP sync setup screen in v9? It's set to "msRTCSIP-primaryuseraddress" by default. Unfortunately it's not modifiable after the relationship is setup and I'm not sure what to set it to. I'll also have to see what value it takes during an upgrade http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide_chapter_01100.html#CUCM_RF_LE051F5C_00 Sent from my iPhone _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip itevomcid
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
