Customer is moving from 2811/PVDM2s the 2911/PVD3/15.2. Customer has mix of 7965 and 9971 video phones.
I am planning the PVDM3-128/256/sDSPs need in each 2911. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmevconf.html#pgfId-1055244 <<this running-config is for CME but applies to CUCM as well They will have a mix of 9971 video/audio and 7965 audio conference using Cisco IOS Homogenous Video Conferences. Is it necessary in the router and CUCM to configure both of these dspfarm profiles or will the video do voice-only calls too? dspfarm profile 1 conference video homogenous codec g729r8 codec g711ulaw codec h264 vga max conference-participants 4 max session 6 associate application SCCP no shut ! dspfarm profile 2 conference codec g729r8 codec g711ulaw max session 6 associate application SCCP no shut In short if I only configure profile 1 is that fine? Can it do both audio and video conferneces, say if only 7965 endpoints us it, then it would be used for audio only? Or does it have to be a video to for that profile? Do I even need to configure profile 2?
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip