Hi I've seen a couple of CUBEs configured with the following:
dial-peer voice x voip b2bua I'm confused by this as the CUBE is per definition a B2BUA without that command. The only thing I can find in the documentation on b2bua is regarding CME. b2bua To configure a dial peer associated with an individual Session Initiation Protocol (SIP) phone in Cisco Unified CME or a group of phones in a Cisco Unified SIP Survivable Remote Site Telephony (SRST) environment to point to Cisco Unity Express, use the b2bua command in dial-peer configuration mode. To disable B2BUA call flow on the dial peer, use the no form of this command. So I'm assuming it's redundant to configure it unless you run CME? Thanks _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip