They have both existed since 10 but you were stuck with one or the other, with 10.6 you will be allowed to have both in production, there is a white paper coming with details.
Matthew G. Loraditch - CCNP-V, CCNA-R&S, CCDA Network Engineer We understand and solve your technology challengers so you can sell and service cars. Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts> ________________________________ From: cisco-voip [cisco-voip-boun...@puck.nether.net] on behalf of Kevin Przybylowski [kev...@advancedtsg.com] Sent: Thursday, December 18, 2014 8:02 PM To: Mike; Josh Warcop Cc: cisco-voip@puck.nether.net Subject: Re: [cisco-voip] Consolidate two separate UCCX cluster and migrate to 9.x Do you mean the last version? They’ve been together the last few revisions. From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Mike Sent: Thursday, December 18, 2014 6:22 PM To: Josh Warcop Cc: cisco-voip@puck.nether.net Subject: Re: [cisco-voip] Consolidate two separate UCCX cluster and migrate to 9.x UCCX 10.6 supports CAD and Finesse as ️Co-resident and rumor has it that is the only version that will support this configuration so plan accordingly. Sent from my iPhone On Dec 18, 2014, at 3:17 PM, Josh Warcop <j...@warcop.com<mailto:j...@warcop.com>> wrote: First - your target version should be the 10.6 release which is Communications Manager 10.5.2 and CCX 10.6.1. You merging of UCCX should also include going to Finesse and dropping CAD. If you have a non-overlapping dial plan the merging is simple. However if you have to do a lot of dial plan work it can be a good challenge. In this case I would support the decision to build fresh and merge into one new cluster. This will allow you to build new dial plans, new UCCX integration, and move site by site or by application. Sent from my Windows Phone ________________________________ From: Ashwani R<mailto:ashw...@ranpise.com> Sent: 12/18/2014 8:39 AM To: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> Subject: [cisco-voip] Consolidate two separate UCCX cluster and migrate to 9.x Team, I have a customer who has two separate UCCX HA cluster with their respective CUCM cluster (merging two companies). They would like to merge both CUCM and UCCX cluster to one cluster and upgrade them to 9.x. They are running CUCM version 7.1.3.10000-11 and UCCX cluster running 7.0(2) Build254. What is the best way to do this? Can they keep both historical data from UCCX and move them to 9.x ? I know this is not possible but just want to see if anyone has done it before. We have already built new 9.x CUCM and UCCX cluster with new set of IP addresses with blank configurations. Any help will be appreciated. Thanks, Ashwani _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip