Hmmm… Subject line says “from 8.5” but message body says “from 8.6”. Perhaps he’s referring to 8.5?
If you are then keep in mind the upgrade will require not only the version3-keys.cop file, but you’ll need to install the refresh_upgrade file as well. See the ReadMe: http://www.cisco.com/web/software/282204704/18582/ciscocm.refresh_upgrade_v1.5.pdf From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Anthony Holloway Sent: Thursday, March 26, 2015 12:45 PM To: Nick; cisco-voip@puck.nether.net Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5 I don't understand your question/concern. Both documents are saying the same thing: you can direct upgrade from 8.6(1). On Thu, Mar 26, 2015 at 10:51 AM Nick <csv...@googlemail.com<mailto:csv...@googlemail.com>> wrote: Hi All Just checking through documentation for CUCM 10.5 for an upgrade, the compatibility guide states that a direct upgrade is from 8.6.1 onwards as shown below. Upgrade Paths for Cisco Unified Communications Manager Release 10.5(2)SU1 [http://www.cisco.com/c/dam/en/us/td/i/templates/note.gif] Note ________________________________ If your release is not listed in the following table, find the upgrade path from your current release to a listed release in Cisco Unified Communications Manager Software Compatibility Matrix for Release 9.X and Earlier at http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf<http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf>. ________________________________ Table 15 Export Restricted Supported Cisco Unified Communications Manager Upgrades for Release 10.5(2)SU1 10.5(2)SU1 10.5.2.11900-3 Active February 24, 2015 Direct Upgrade: 10.5(2), 10.5(1)SU1a, 10.5(1)SU1, 10.5(1), 10.0(1)SU2, 10.0(1)SU1, 10.0(1), 9.1(2)SU2a, 9.1(2)SU2, 9.1(2)SU1, 9.1(2), 9.1(1a), 9.1(1), 9.0(1), 8.6(2a)SU5, 8.6(2a)SU4a, 8.6(2a)SU4, 8.6(2a)SU3, 8.6(2a)SU2, 8.6(2a)SU1, 8.6(2a), 8.6(2), 8.6(1a), 8.6(1) Supported: (Consult the Cisco Unified Communications Manager Upgrade Guide for details) 8.5.(1)SU7, 8.5.(1)SU6, 8.5(1)SU5, 8.5(1)SU4, 8.5(1)SU3, 8.5(1)SU2, 8.5(1)SU1, 8.5(1), 8.0(3a)SU3, 8.0(3a)SU2, 8.0(3a)SU1, 8.0(3a), 8.0(3), 8.0(2c)SU1, 8.0(2c), 8.0(2b), 8.0(2a), 8.0(2), 8.0(1), 7.1(5b)SU6(restricted), 7.1(5b)SU5(restricted), 7.1(5b)SU4(restricted), 7.1(5b)SU3(restricted), 7.1(5b)SU2(restricted), 7.1(5b)(restricted), 7.1(5a)(restricted), 7.1(5)SU1a(restricted), 7.1(5)SU1(restricted), 7.1(5)(restricted), 7.1(3b)SU2, 7.1(3b)SU1, 7.1(3b), 7.1(3a)SU1a, 7.1(3a)SU1, 7.1(3a), 7.1(3), 6.1(5)SU3, 6.1(5)SU2, 6.1(5)SU1, 6.1(5), 6.1(4a)SU2, 6.1(4a), 6.1(4)SU1, 6.1(4) However in the Read Me notes for 10.5.2 Su1 it states the following Version and Description This SU is a cumulative update that incorporates all of the fixes and changes from Cisco Unified Communications Manager 10.5(2) along with additional changes that are specific to this SU. Note You can only install this SU on Cisco Unified Communications Manager Release 6.1(4x), 6.1(5x), 7.1(3x), 7.1(5x), 8.0(x), 8.5(1x), 8.6(x), 9.0(x), 9.1(x), 10.0(1), 10.5(1), or 10.5(2) This SU will not install over any 10.5(2)ES’s. Upgrades from 6x, 7x, 8.x, and 9.x need to be requested via PUT (www.cisco.com/upgrade<http://www.cisco.com/upgrade>) to obtain the necessary license. This SU should not be installed on a Business Edition 3000 server. I would normally always go with what is says in the compatibility matrix, however my colleague has just done an upgrade albeit in a lab from 8.5.1 direct to 10.5.2 SU1. Anyone know if he just got lucky or if that is now supported? Regards Nick _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
