It looks like you picked a timezone setting which does not have/support daylight savings.
Here are your 5 hour offset choices to pick from, and I've labelled them with their DST caps for your convenience. I highlighted in yellow the one you have on your server. admin:run sql select name, case when dstdate = '0/0/0/0,00:00:00:00' then 'No DST' else 'DST' end as DST from typetimezone where bias = 300 name dst ============================ ====== America/Lima No DST America/New_York DST America/Indiana/Indianapolis DST America/Atikokan No DST America/Bogota No DST America/Cayman No DST America/Detroit DST America/Eirunepe No DST America/Grand_Turk DST America/Guayaquil No DST America/Havana DST America/Indiana/Marengo DST America/Indiana/Petersburg DST America/Indiana/Vevay DST America/Indiana/Vincennes DST America/Indiana/Winamac DST America/Iqaluit DST America/Jamaica No DST America/Kentucky/Louisville DST America/Kentucky/Monticello DST America/Montreal DST America/Nassau DST America/Nipigon DST America/Panama No DST America/Pangnirtung DST America/Port-au-Prince DST America/Rio_Branco No DST America/Thunder_Bay DST America/Toronto DST EST No DST EST5EDT DST Etc/GMT+5 No DST Ideally, you would have either America/New_York, or EST5EDT if you're against associating with New York for some reason. You can see from this comparison that they have identical time settings, so either one will work. admin:run sql select enum, name, bias, stddate, stdbias, dstdate, dstbias from typetimezone where name = 'America/New_York' or name = 'EST5EDT' enum name bias stddate stdbias dstdate dstbias ==== ================ ==== ==================== ======= =================== ======= 12 America/New_York 300 0/11/0/1,02:00:00:00 0 0/3/0/2,02:00:00:00 -60 350 EST5EDT 300 0/11/0/1,02:00:00:00 0 0/3/0/2,02:00:00:00 -60 Since you're on version 10.5, you should be able to set the new timezone without license issues, though it does require a restart. admin:set timezone 152 Using timezone: America/New_York A system restart is required Change timezone and reboot (yes|no)? no On Thu, Mar 26, 2015 at 10:16 PM Jonathan Charles <jonv...@gmail.com> wrote: > > Host Name : CUC > Date : Thu Mar 26, 2015 22:12:45 > Time Zone : Eastern Standard Time (EST) > Locale : en_US.UTF-8 > Product Ver : 10.5.1.10000-7 > Unified OS Version : 6.0.0.0-2 > > > admin:utils ntp status > ntpd (pid 7533) is running... > > remote refid st t when poll reach delay offset > jitter > ============================================================ > ================== > *192.168.20.1 192.5.41.209 2 u 44 64 377 1.310 -0.531 > 5.709 > > > synchronised to NTP server (192.168.20.1) at stratum 3 > time correct to within 53 ms > polling server every 64 s > > Current time in UTC is : Fri Mar 27 03:13:15 UTC 2015 > Current time in EST is : Thu Mar 26 22:13:15 EST 2015 > > > admin:show version active > Active Master Version: 10.5.1.10000-7 > Active Version Installed Software Options: > ciscocm.dst-updater.2014f-el6-00.10.5.1.cop > > > And the time is an hour behind... > > I have verified the UTC time is correct and the NTP reference is handing > out correct UTC, the offset is incorrect... > > I have installed the latest DST updater and rebooted, to no effect. > > > Any ideas? > > > > Jonathan > > _______________________________________________ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip