Jason,
Thanks for the quick response.
I have been successfully (with removing columns and speed dial stuff)
taking a BAT export of all (33) VoIP phones from my 8.5.1BE system to my
new 10.5.2 system.
I only have 1 pots/ analog port on a VG224 on the 8.5.1BE that is not
going to be used on on the 10.5.2.
What I am look for is a way to build 100+ lines on a VG350 in MGCP using
BAT in 10.5.2 from scratch.
Thanks in advance.
-Mike
Michael T. Voity
University of Vermont
On 4/13/15 3:29 PM, Jason Aarons (AM) wrote:
You can’t export/import on different versions as the database is
different between versions.
In reality doing an export/import on same version has its own headaches.
A suitcase export/import tool like COBRAS would be a nice product
enhancement request.
*From:*cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] *On
Behalf Of *Michael T. Voity
*Sent:* Monday, April 13, 2015 3:17 PM
*To:* voip puck
*Subject:* [cisco-voip] BAT on VG350 ports
Hello,
I have combed the gossamer threads looking for threads on how one could
export gateway endpoints (POTS analog line) of a vg350, filling the
sheet with 144 lines, then doing an import with the BAT tool.
I have CUCM 10.5.2.10000-5.
I noticed that on my 8.5.1 system that analog phones/line show up under
"Devices->Phone" and on the 10.5.2 system the analog phones/line only
show up under "Devices->Gateways->Gateway Endpoints"
Ideas?
-Mike
--
Michael T. Voity
University of Vermont
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net <mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
itevomcid
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
