I'm not sure Jonathan, I have not done SCCP on a VG310, I would assume it would be the same as a 224, but you know what that gets you (assuming).
On Mon, Jun 15, 2015 at 8:39 AM, Jonathan Charles <jonv...@gmail.com> wrote: > I am doing SCCP... so how should it be formed? > > On Mon, Jun 15, 2015 at 7:45 AM, Charles Goldsmith <wo...@justfamily.org> > wrote: > >> Not with MGCP >> >> Sent via C=64 Mobile >> >> On Jun 15, 2015, at 12:09 AM, Jonathan Charles <jonv...@gmail.com> wrote: >> >> So, for Domain Name, did you not specify the SKIGWXXXXXXX or just the >> last 10 of the MAC? >> >> >> Jonathan >> >> On Mon, Jun 15, 2015 at 12:00 AM, Charles Goldsmith <wo...@justfamily.org >> > wrote: >> >>> Jonathan, here is the csv I've used recently with a MGCP vg310. Just >>> like a 224, I create the gateway template and setup the first port with a >>> line template. >>> >>> I did this recently on a 10.5.2 system with no issues. >>> >>> Let me know if you have any questions. >>> >>> >>> On Sun, Jun 14, 2015 at 10:58 PM, Jonathan Charles <jonv...@gmail.com> >>> wrote: >>> >>>> Tried BATing a VG310 in the same way we used to do a VG224 and it >>>> failed like crazy...it installs the first one, then errors out saying the >>>> domain name already exists... >>>> >>>> I used the BAT template with 10.5.2-11900 and used the tab for the >>>> VG310s. >>>> >>>> I tried adding the VG310 first and not, each time it fails... or just >>>> adds the first port 0... >>>> >>>> Any ideas? >>>> >>>> >>>> Jonathan >>>> >>>> >>>> >>>> _______________________________________________ >>>> cisco-voip mailing list >>>> cisco-voip@puck.nether.net >>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>>> >>>> >>> >> >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
