There's this... http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/2600-3600-3700-series-t3-e3-network-module/product_data_sheet09186a008010fba2.html
But in CUCM v9.1, I don't see it as a pull down option in a 3900 series gateway configuration. So, not sure it's supported for voice. --- Lelio Fulgenzi, B.A. Senior Analyst, Network Infrastructure Computing and Communications Services (CCS) University of Guelph 519‐824‐4120 Ext 56354 le...@uoguelph.ca www.uoguelph.ca/ccs Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1 ----- Original Message ----- From: "Nick Barnett" <nicksbarn...@gmail.com> To: "Cisco VoIP Group" <cisco-voip@puck.nether.net> Sent: Wednesday, June 8, 2016 9:51:15 AM Subject: [cisco-voip] DS3 voice delivery? So, we have an old MUX that died. We have to either replace the MUX or use something else. Is it possible to use a DS3 SM on an ISR to terminate the DS3? Right now, we have a DS3 that hits a mux and breaks out to 28 PRIs... those PRIs go into a plethora of VWIC interfaces on a SIP router. Would it be possible to get another module for this router that lets us plug the coax in and skip all of this VWIC/MUX business? Thanks, Nick _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip