Thanks, but that side is fine... it is the detection of fax vs. voice and diverting fax calls to a T.37 router (since the 4000 doesn't support T.37 any more)
Jonathan On Wed, Sep 28, 2016 at 12:12 AM, James Buchanan <[email protected]> wrote: > I wrote this simplified explanation about eight years ago for SIP. I think > you could probably adapt it for your situation. > > Thanks, > > James > > On Wed, Sep 28, 2016 at 12:15 AM, Jonathan Charles <[email protected]> > wrote: > >> So, I am trying to understand this configuration: >> >> http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube_ >> proto/configuration/15-mt/cube-proto-15-mt-book/voi-cube >> -fax-detection-vxml.html >> >> I want to configure a 2921 with the TCL Fax Offramp (T.37 Fax to >> Email)... however, I need to detect fax on the line before forwarding it to >> that router... >> >> Inbound is a 4451-X via T1-CAS, with a back to back PRI to the 2921 for >> T.37... >> >> >> The plan: >> >> Use Fax Detect on inbound calls and if it is a fax, forward it out the >> PRI to the 2921. >> >> If it is voice, route the call to CUCM. >> >> However, the guide does not appear to explain how to route individual >> numbers, only fax to a range of numbers. >> >> For example, someone calls 8000, and I detect fax, send 8000 down the >> back to back PRI to the 2921. If someone calls 8001, do the same, and for >> 8002, and so on. >> >> Anyone ever configure this? >> >> >> >> Jonathan >> >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
