I have had this issue but the network configuration did not allow it to register or the device type is different than what you are actually trying to configure. It is a ATA 186 correct?
[Lisa Notarianni White Logo Business Card] From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Asim Mekki Basheer Sent: Wednesday, October 05, 2016 9:13 AM To: Ashwani Ranpise <ashw...@ranpise.com>; cisco-voip@puck.nether.net Subject: Re: [cisco-voip] Cisco ATA 186 please see the attached still showed rejected even after assigned The DN Thanks ASIM ________________________________ From: Ashwani Ranpise <ashw...@ranpise.com<mailto:ashw...@ranpise.com>> Sent: Wednesday, October 5, 2016 5:55 AM To: Asim Mekki Basheer Subject: Re: [cisco-voip] Cisco ATA 186 Asim, I dont see any DN has been assigned. Assign the DN to your ATA-186 device and it will work. Thanks, Ashwani On Wed, Oct 5, 2016 at 8:50 AM, Asim Mekki Basheer <asim_...@hotmail.com<mailto:asim_...@hotmail.com>> wrote: Hello Everyone we have CCM 7.5 ,recently we faced issue with fax the ATA showed rejected in the call manager we make factory reset the same issue Regards _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
