That is indeed enforced globally. There is no way to enforce this natively in CUCM. If you have any type of firewall or stateful inspection between CUCM and the gateway and using H.323 then you might look at terminating sessions. You might be able to do an automation with EEM on the gateway.
-Wes On Jan 18, 2017, at 12:00 PM, Asim Mekki Basheer <asim_...@hotmail.com<mailto:asim_...@hotmail.com>> wrote: Hello we have CUCM 7.5 connected to outside With E1 PRI is there any way to set Timer to force disconnect outgoing Calls after 30 Minutes , the only way i found is : CCM go to: CCMAdmin--> Service --> Service Parameter --> Cisco CallManager -Max call duration but this will be applied Globally . Regards ASIM _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
