Pretty sure Informacast/singlewire has a solution exactly for this purpose, if
you can get them to finish upgrading it. Either that or I think CER can manage
a similar solution. I’ve personally never done either though.
Ben Amick
Telecom Analyst
From: cisco-voip [mailto:[email protected]] On Behalf Of Lisa
Notarianni
Sent: Monday, January 30, 2017 4:19 PM
To: [email protected]
Subject: [cisco-voip] Panic Button Solution?
Call Manager 10.5.2.12901-1
I have a request from a department here at The University of Scranton to use a
button on their phone as a panic button that would do the following:
1. Automatically dial our Police department without a ring tone
2. Provide one way communication to University Police so they can listen
to the conversation to get an idea of the issue and then dispatch an officer
It is important to have silence on the phone connection when the button is
pressed
I looked into PLAR but I don’t think it can be configured exactly this way. We
have a SingleWire server but it is in the process of being upgraded. So, before
we install a physical panic button without a voice feature, we wondered if
there were any other creative solutions.
Thank you in advance -
Lisa Notarianni
[Lisa Notarianni Telecom Engineer]
Confidentiality Note: This message is intended for use only by the individual
or entity to which it is addressed and may contain information that is
privileged, confidential, and exempt from disclosure under applicable law. If
the reader of this message is not the intended recipient or the employee or
agent responsible for delivering the message to the intended recipient, you are
hereby notified that any dissemination, distribution or copying of this
communication is strictly prohibited. If you have received this communication
in error, please contact the sender immediately and destroy the material in its
entirety, whether electronic or hard copy. Thank you
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip