Hi Anthony,

Yup, unfortunately we don’t do a very good job of documenting this. Ideally, it 
should configure itself and the reason the secondary tab is not populated is 
that secondary tab is meant for standalone CUIC servers itself where each 
server needs to have a primary/backup, but in UCCX we don’t utilize that 
concept.

I have asked the team to create an external facing technotes covering this 
behavior and how the troubleshooting should be done. I will share the document 
here once it is done for review.

Regards,
Abhiram Kramadhati
Technical Solutions Manager, CCBU
CCIE Collaboration # 40065

From: Matthew Loraditch <mloradi...@heliontechnologies.com>
Date: Wednesday, 12 April 2017 at 1:05 AM
To: Anthony Holloway <avholloway+cisco-v...@gmail.com>, "Abhiram Kramadhati 
(akramadh)" <akram...@cisco.com>, Nick Britt <nickolasjbr...@gmail.com>
Cc: Cisco VoIP Group <cisco-voip@puck.nether.net>
Subject: RE: [cisco-voip] UCCX HA and CUIC Historical Data Source

11.5, I installed SU1 after install, but didn’t look at CUIC until after.

Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
Network Engineer
Direct Voice: 443.541.1518


Facebook<https://www.facebook.com/heliontech?ref=hl> | 
Twitter<https://twitter.com/HelionTech> | 
LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> 
| G+<https://plus.google.com/+Heliontechnologies/posts>

From: Anthony Holloway [mailto:avholloway+cisco-v...@gmail.com]
Sent: Tuesday, April 11, 2017 3:34 PM
To: Matthew Loraditch <mloradi...@heliontechnologies.com>; Abhiram Kramadhati 
(akramadh) <akram...@cisco.com>; Nick Britt <nickolasjbr...@gmail.com>
Cc: Cisco VoIP Group <cisco-voip@puck.nether.net>
Subject: Re: [cisco-voip] UCCX HA and CUIC Historical Data Source

What version Matt?

On Tue, Apr 11, 2017 at 1:34 PM Matthew Loraditch 
<mloradi...@heliontechnologies.com<mailto:mloradi...@heliontechnologies.com>> 
wrote:
Just on#1 and 2 because I happened to just be building 2 CCX servers today, it 
did configure itself.

Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
Network Engineer
Direct Voice: 443.541.1518<tel:(443)%20541-1518>
Facebook<https://www.facebook.com/heliontech?ref=hl> | 
Twitter<https://twitter.com/HelionTech> | 
LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> 
| G+<https://plus.google.com/+Heliontechnologies/posts>

From: cisco-voip 
[mailto:cisco-voip-boun...@puck.nether.net<mailto:cisco-voip-boun...@puck.nether.net>]
 On Behalf Of Anthony Holloway
Sent: Tuesday, April 11, 2017 2:29 PM
To: Abhiram Kramadhati (akramadh) 
<akram...@cisco.com<mailto:akram...@cisco.com>>; Nick Britt 
<nickolasjbr...@gmail.com<mailto:nickolasjbr...@gmail.com>>

Cc: Cisco VoIP Group 
<cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>>
Subject: Re: [cisco-voip] UCCX HA and CUIC Historical Data Source

I do appreciate the follow up, but I have a bone to pick here...actually, a 
few.  First, I was not in a situation where datasources were pointing at each 
other, I did have them pointing to a single node.  And that's where failover 
failed me.  I had both nodes pointing at the default Node 1, which was my 
Master, and when failover happened, reporting was down.

1) Where in the documentation does it say to reconfigure the datasource to 
point to the non-master node when deploying HA?

2) Why doesn't it configure itself?

3) Why doesn't it update itself like LiveData does?

4) Why can't we use the secondary source tab to populate both nodes?

5) What if I don't want all my reporting traffic traversing the WAN in HAoW 
deployments?  I.e., My Mast is located where most of my Agent and Supervisors 
are, and I want reporting to stay local to them.  The HA node is there just in 
case of a datacenter failure.
On Tue, Apr 11, 2017 at 3:03 AM Abhiram Kramadhati (akramadh) 
<akram...@cisco.com<mailto:akram...@cisco.com>> wrote:
Hi guys,

So, here is the expected behavior and we are taking 11.5 as reference:

Historical datasource:

The historical datasource on either node should always point to the non-master 
Node. So, assume N1 is the master. CUIC on N1 should be pointing to N2 
datasource host and CUIC on N2 should be pointing to N2 datasource host. Also, 
unlike older versions we don’t redirect users to the secondary UCCX IP to login 
to run reports. You can login to any node CUIC and run the report, but the 
datsource host should be the secondary server.
However, we have seen cases where the nodes point to each other: N1 pointing to 
N2 (expected), N2 pointing to N1 (problem). This is opened as a defect and we 
are investigating why this can happen and I am guessing that’s what has 
happened in Anthony’s case in the original email thread.

CSCvd22513 is the defectID for your reference. I will share more information on 
the outcome of the investigation.

LiveData:

This is always pointing to the local node by default and need not be changed. 
The LD datasource uses REST API to figure out the engine master and will obtain 
the feed from the current active server. The LD failover too should happen 
automatically. So if the engine failover happens and you are still logged into 
N1 (slave now), LD should still be available and usable.

Regards,
Abhiram Kramadhati
Technical Solutions Manager, CCBU
CCIE Collaboration # 40065



From: "Abhiram Kramadhati (akramadh)" 
<akram...@cisco.com<mailto:akram...@cisco.com>>
Date: Friday, 7 April 2017 at 2:52 PM
To: Anthony Holloway 
<avholloway+cisco-v...@gmail.com<mailto:avholloway%2bcisco-v...@gmail.com>>, 
Nick Britt <nickolasjbr...@gmail.com<mailto:nickolasjbr...@gmail.com>>

Cc: Cisco VoIP Group 
<cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>>
Subject: Re: [cisco-voip] UCCX HA and CUIC Historical Data Source

I will get back on this by Monday with details.

Regards,
Abhiram Kramadhati
Technical Solutions Manager, CCBU
CCIE Collaboration # 40065


From: cisco-voip 
<cisco-voip-boun...@puck.nether.net<mailto:cisco-voip-boun...@puck.nether.net>> 
on behalf of Anthony Holloway 
<avholloway+cisco-v...@gmail.com<mailto:avholloway%2bcisco-v...@gmail.com>>
Date: Friday, 7 April 2017 at 6:01 AM
To: Nick Britt <nickolasjbr...@gmail.com<mailto:nickolasjbr...@gmail.com>>
Cc: Cisco VoIP Group 
<cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>>
Subject: Re: [cisco-voip] UCCX HA and CUIC Historical Data Source

Nope. Abhiram?

On Thu, Apr 6, 2017 at 2:31 PM Nick Britt 
<nickolasjbr...@gmail.com<mailto:nickolasjbr...@gmail.com>> wrote:
Hi Anthony,

Sorry to grave dig but just wondered if you ever got an answer for this?

I am about to go down this rabbit hole myself as a customer wants a better 
explanation (documentation) as to how this is supposed  to be configured and 
how this should behave.

Cheers

Nick

On Wed, Jun 15, 2016 at 10:22 PM, Anthony Holloway 
<avholloway+cisco-v...@gmail.com<mailto:avholloway+cisco-v...@gmail.com>> wrote:
There seems to be zero documentation for UCCX that mentions changing or adding 
Data Source configuration in CUIC when running HA; whether HAoL or HAoW.

However, I have heard from Cisco employees, forums posts, and colleagues, these 
two points:
1.      The Data Source should point to the secondary node, and you have to 
manually change it, as the default is pointing to the primary node.
2.      The Data Source's Secondary tab is defaulted to disabled, and not 
populated.  It shouldn't be used, and CUIC takes care of updating the Data 
Source during a failure.
First off, where in the documentation is that explained?  I cannot find a good 
explanation, sans ambiguity, to save my life.  Are people just spreading rumors 
and old wives tales?

Also, I do know that back in the HRC days, the client would handle the 
connection to the secondary server automatically.  So, I can see where this 
tale comes from.

Now, with HAoW, I tested failover with the server shutdown.  Not in slave, but 
actually powered off.  What I observed was, the Data Source was not 
automatically updated, and I could run any reports, despite being logged in to 
the secondary CUIC server.  The Data Source connection test failed, obviously, 
and reports failed, obviously.

I did consider take a leap of faith and confiure the CUIC Data Source's 
Secondary tab, but the user account to connect to the DB instance was not in my 
control, and I don't know the password.  I'm sure I could get it, but it was a 
show stopper nonetheless.

So, has anyone here actually tested with a failed node or island mode with 
their HA setup, or is it all just speculation, like this post:

https://supportforums.cisco.com/discussion/12473981/ha-uccx-cuic-data-only-one-server

_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



--
- Nick
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to