TDM DSPs on the 4ks have to be on the NIM because there is no shared TDM 
clocking backplane like there is on the ISRs/ISR G2. 

Dspfarm stuff can use extra dsps on a NIM and the motherboard DSPs can only be 
used for dspfarm tasks. 

Sent from my iPhone

> On May 12, 2017, at 1:35 PM, Jose Colon II <[email protected]> wrote:
> 
> I was under the same assumption of why there was a dsp slot on the NIM. I 
> know I read a Cisco doc somewhere that lead me that direction.
> 
>> On May 12, 2017 2:28 PM, "Ryan Huff" <[email protected]> wrote:
>> So this is interesting; I was under the impression the backplane DSP could 
>> not extend to the NIM (and is the fundamental reason, among others, that the 
>> NIM has its own DSP) .... looks like I have a new lab task :).
>> 
>> On May 12, 2017, at 3:09 PM, Anthony Holloway 
>> <[email protected]> wrote:
>> 
>>> Rashmi Patel ( [email protected] ) - 12:31 PM
>>> Q: Does that mean conference resource will be used from NIM DSP not from 
>>> mother board DSP resources
>>> Priority: N/A
>>> Dolan Spitler - 12:57 PM
>>> A: When it comes to IP services (xcoding, conferencing, MTP) The 
>>> motherboard DSP can be pooled with the NIM DSPs to increase the DSPfarm 
>>> scale
>>> 
>>> Source: https://communities.cisco.com/docs/DOC-7823 (look for the 4000 
>>> event on Oct 16th)
>>> 
>>>> On Fri, May 12, 2017 at 1:17 PM Brian Meade <[email protected]> wrote:
>>>> My understanding is any dspfarm resources such as conferencing/transcoding 
>>>> use the motherboard resources while the ones on the NIM are just for the 
>>>> voice ports themselves.
>>>> 
>>>>> On Fri, May 12, 2017 at 11:51 AM, Jose Colon II <[email protected]> 
>>>>> wrote:
>>>>> If you will be using DSP's you will need to decided if you will need them 
>>>>> on the motherboard or on the T1 NIM. On the motherboard I believe it can 
>>>>> only be used for conferencing. You will need them on the NIM for 
>>>>> transcoding.
>>>>> 
>>>>>> On May 12, 2017 6:42 AM, "Ryan Huff" <[email protected]> wrote:
>>>>>> T1 PRI commands are substantially different if that is in play.
>>>>>> 
>>>>>> Sent from my iPhone
>>>>>> 
>>>>>> On May 12, 2017, at 7:35 AM, Matthew Loraditch 
>>>>>> <[email protected]> wrote:
>>>>>> 
>>>>>>> The vast majority of commands are the same. Netflow stuff is changed 
>>>>>>> completely if you use that.  Outside of updating interface names, most 
>>>>>>> of our templates just worked.
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>>>>>>> Network Engineer
>>>>>>> Direct Voice: 443.541.1518
>>>>>>> 
>>>>>>> 
>>>>>>> Facebook | Twitter | LinkedIn | G+
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>> From: cisco-voip [mailto:[email protected]] On Behalf 
>>>>>>> Of [email protected]
>>>>>>> Sent: Friday, May 12, 2017 7:31 AM
>>>>>>> To: [email protected]
>>>>>>> Subject: [cisco-voip] Migrating a Cisco 2901 to a Cisco 4321
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>> We have a base config we use for building our 2901/11’s . Will this 
>>>>>>> work on the 4321 or do I have to start from scratch.
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>> Thanks
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>> Norm Nicholson
>>>>>>> 
>>>>>>> Telecom Analyst
>>>>>>> 
>>>>>>> City of Kitchener
>>>>>>> 
>>>>>>> (519) 741-2200 x 7000
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>>  
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> cisco-voip mailing list
>>>>>>> [email protected]
>>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>> 
>>>>>> _______________________________________________
>>>>>> cisco-voip mailing list
>>>>>> [email protected]
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> cisco-voip mailing list
>>>>> [email protected]
>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>> 
>>>> 
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> [email protected]
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>> _______________________________________________
>>> cisco-voip mailing list
>>> [email protected]
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to