I just hit this issue tonight myself (11.5(SU1)); my case doesn't seem to fit CSCvb00248 as I am using 9 character passwords; I'm not using any special characters either. I've tried all the normal reboots, delete / re-added from the processNode table ... etc, NTP and DNS are solid. I opened a TAC case with the DB installer Service logs and Packet Captures from the pub. I'll update the thread if they turn anything up for me.
In parallel, I think I'm going to try Dana's fix and scrap the pub and start over. -Ryan ________________________________ From: cisco-voip <cisco-voip-boun...@puck.nether.net> on behalf of Dana Tong <dana.t...@yellit.com.au> Sent: Wednesday, August 9, 2017 8:24 PM To: Dave Goodwin; Brian Meade Cc: cisco-voip@puck.nether.net Subject: Re: [cisco-voip] 11.5.1SU2 Can't Add Node Yes I have had a similar error with the pre-installed OVA on two occasions. Mine was failing on the checking comms with the first node. DNS / A and Reverse PTR was correct Security password correct Time / NTP was all working Server nodes were added to Publisher as FQDN My only solution was to build a fresh Publisher (or was it a fresh Subscriber?!?). Hope this helps. From: cisco-voip <cisco-voip-boun...@puck.nether.net> on behalf of Dave Goodwin <dave.good...@december.net> Date: Thursday, 10 August 2017 at 7:32 am To: Brian Meade <bmead...@vt.edu> Cc: "cisco-voip@puck.nether.net" <cisco-voip@puck.nether.net> Subject: Re: [cisco-voip] 11.5.1SU2 Can't Add Node A few months ago back on SU1, I was using a 16 character password for the platform on a brand new cluster and the subscriber installs would always fail. At first I thought it was a problem with PCD (which I was using to install the cluster) but turns out it happened even when doing the whole process by hand. The workaround was to use a 15 character password during the install. I haven't tried a fresh install of a cluster with SU2 yet to see if it's really fixed - but the affected versions field does list the SU2 build numbers. https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvb00248/ Here is what any sub node looked like when it failed for this reason (assuming the screen shot attaches for me properly)... On Wed, Aug 9, 2017 at 5:09 PM, Brian Meade <bmead...@vt.edu<mailto:bmead...@vt.edu>> wrote: Found a bug related to custom banner size but not much else- https://bst.cloudapps.cisco.com/bugsearch/bug/CSCub14050 I was using the same exact version for CUCM and CUC with no issues adding nodes. On Wed, Aug 9, 2017 at 5:07 PM, Brian Meade <bmead...@vt.edu<mailto:bmead...@vt.edu>> wrote: I just did this successfully a couple weeks ago. Where does it break? On Wed, Aug 9, 2017 at 5:04 PM, Matthew Loraditch <mloradi...@heliontechnologies.com<mailto:mloradi...@heliontechnologies.com>> wrote: I’ve set, reset, typed different versions of the security password and can’t get nodes added via the factory prebuilt VMs on brand new BE7Ks Is there a known bug or am I crazy? Both CUC and CUCM, albeit I doubt that matters since that part of the code is shared. Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA Network Engineer Direct Voice: 443.541.1518<tel:(443)%20541-1518> Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts> _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip