So if you upgrade CUC to SU3, and don't have the encryption loaded, it will disable encryption?
Dennis Heim | Emerging Technology Architect (Collaboration) World Wide Technology, Inc. | +1 314-212-1814 "Worry less about who you might offend, and more about who you might inspire" -- Tim Allen "When you have unlimited time, its easy" - Captain Chesley Sullenberger "There is a fine line between Wrong and Visionary. Unfortunately, you have to be a visionary to see it." - Sheldon Cooper "The greatest danger for most of us is not that our aim is too high and we miss it, but that it is too low and we reach it." -- Michelangelo Buonarroti "We should transform the way we work" - Rowan Trollope "If you're not failing every now and again, it's a sign you're not doing anything very innovative" - Woody Allen Click here to join me in my Collaboration Meeting Room -----Original Message----- From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Erick Bergquist Sent: Monday, August 28, 2017 2:41 AM To: Charles Goldsmith <wo...@justfamily.org> Cc: voip puck <cisco-voip@puck.nether.net> Subject: Re: [cisco-voip] PLM 11.0 issues with CUC 11.5.1 SU3? Thanks Charles. Rehosted Unity licenses to unity server w/added encryption license and Unity is happy again. Weird it worked fine for a week before throwing a licensing error. Erick On Mon, Aug 28, 2017 at 12:11 AM, Erick Bergquist <erick...@gmail.com> wrote: > FWIW, > > This is the only paragraph in the CUC 11.5 SU3 release notes. > Encryption is disabled on CUC at moment. > > In earlier releases, by default encryption was enabled on Cisco Unity > Connection. However, Unity Connection 11.5(1) SU3 and later allows you > to enable or disable the encryption on restricted version of Cisco > Unity Connection to use the security modules. In Demo Mode, the > encryption is disabled by default. It means you are not allowed to use > the security modules of Cisco Unity Connection in Demo Mode. You can > enable the encryption on Unity Connection only when $0 ENC SKU/license > file is installed on the PLM. To enable or disable the encryption, a > new CLI command utils cuc encryption is introduced in Unity Connection > 11.5(1) SU3 and later. > > > admin:utils cuc encryption ? > utils cuc encryption [enable | disable | status] admin:utils cuc > encryption status > > Encryption Mode: Disabled > > > I'm not finding much yet on CUCM 11.0 talking to a PLM 11.5 with the > encryption license, if I rehost the licenses to the CUC PLM instance > will CUCM 11.0 sync fine? > > Or switch version reboot back to 9.x and upgrade unity to 11.5.1 SU2. > > > > > On Sun, Aug 27, 2017 at 11:57 PM, Erick Bergquist <erick...@gmail.com> wrote: >> Ok, I was thinking about it being that. Should have stuck to CUC 11.5.1 SU2. >> >> It was working fine for a week. Weird. >> >> So I wonder if I can rehost the licenses to Unity Connection 11.5 SU3 >> and have CUCM 11.0 talk to PLM on unity connection 11.5.1 SU3 fine? >> >> PLM is co-located on CUCM 11.0 right now (not standalone PLM server). >> >> Thanks! >> >> >> On Sun, Aug 27, 2017 at 11:50 PM, Charles Goldsmith >> <wo...@justfamily.org> wrote: >>> 11.5.1su3 requires PLM 11.5.1su2, due to the change with the >>> encryption >>> license: >>> https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/plm/11_5_1_ >>> SU2/releasenotes/cplm_b_release-notes-cplm-1151su2/cplm_b_release-no >>> tes-cplm-1151su2_chapter_01.html >>> Look at the first Note. >>> >>> YMMV, but I ran into a bug when I upgraded a PLM to su2 recently, it >>> wouldn't switch version, even after a reboot, got a vague error >>> about locking the database. After waiting a few hours with no >>> change, booted off of the recovery CD and forced the switch. No >>> issues after that. I had a good backup, so wasn't concerned about forcing >>> it. >>> >>> On Mon, Aug 28, 2017 at 12:43 AM, Erick Bergquist >>> <erick...@gmail.com> >>> wrote: >>>> >>>> Anyone having any issues with CUC 11.5.1 SU3 and PLM on a 11.0.1? >>>> >>>> (thinking about rehosting licenses to the 11.5.1 SU3 CUC node) >>>> >>>> It has been working fine for a week since the upgrade and today CUC >>>> threw a license error. >>>> >>>> PLM 11.0 shows a "Application Error" for the Unity Connection instance. >>>> >>>> I deleted the product instance from PLM, added it back and it picks >>>> up correct 11.5 version fine then on Sync gives "Application Error". >>>> >>>> I've reset the unity servers and call manager acting as PLM and >>>> same thing. >>>> >>>> I reset PLM to default demo mode, deleted the Product instances, >>>> and applied the licenses again. I added Product instances back and >>>> it is not liking Unity still. PLM has all 11.x licenses. PLM >>>> detects the unity version 11.5 correct but doesn't sync. >>>> >>>> Reason we're using CUCM 11.0 over 11.5 is due to phone depreciation >>>> in >>>> 11.5 with some model phones. >>>> >>>> Erick >>>> _______________________________________________ >>>> cisco-voip mailing list >>>> cisco-voip@puck.nether.net >>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>> >>> _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
