Hi Brian I did take a problem report and cannot see much other than the following, so a bit stumped as to what the issue is?
2018-05-31 10:42:18,135 DEBUG [0x00002aa8] [indowplugin\LifecycleController.cpp(744)] [PluginUtils] [LifecycleController::OnSSOViewDisplayed] - Enter - 2018-05-31 10:42:18,135 DEBUG [0x00002aa8] [indowplugin\LifecycleController.cpp(744)] [PluginUtils] [LifecycleController::OnSSOViewDisplayed] - Exit 2018-05-31 10:42:18,135 DEBUG [0x00002aa8] [indowplugin\LifecycleController.cpp(372)] [PluginUtils] [LifecycleController::OnLifeCycleStateChanged] - Enter - 2018-05-31 10:42:18,135 DEBUG [0x00002aa8] [indowplugin\LifecycleController.cpp(375)] [HubWindowPlugin] [LifecycleController::OnLifeCycleStateChanged] - LifeCycleState changed: 0, IsInHubView: 0 2018-05-31 10:42:18,135 DEBUG [0x00002aa8] [indowplugin\LifecycleController.cpp(372)] [PluginUtils] [LifecycleController::OnLifeCycleStateChanged] - Exit 2018-05-31 10:42:18,135 ERROR [0x00002aa8] [indowplugin\LifecycleController.cpp(257)] [HubWindowPlugin] [LifecycleController::OnSignInRequired] - LifecycleController::OnSignInRequired - Cannot open page. Try again later. 2018-05-31 10:42:18,135 DEBUG [0x00002aa8] [indowplugin\LifecycleController.cpp(272)] [HubWindowPlugin] [LifecycleController::OnSignInRequired] - Exiting OnSignInRequired 2018-05-31 10:42:18,135 DEBUG [0x00002aa8] [indowplugin\LifecycleController.cpp(242)] [PluginUtils] [LifecycleController::OnSignInRequired] - Exit Regards Nick On 31 May 2018 at 14:36, Brian Meade <bmead...@vt.edu> wrote: > Probably worth looking at the problem report log to see where it's getting > hung up. > > Hitting Ctr-Shift-d for Diagnostics may also help shed some light to what > is happening. > > On Thu, May 31, 2018 at 6:36 AM, Nick via cisco-voip < > cisco-voip@puck.nether.net> wrote: > >> I have an issue with Jabber sign in from one domain, the customer is in >> the middle of migrating to a new domain, UC servers are in the new domain, >> cisco-uds SRV record in new domain, test PC in new domain are all working >> fine as expected. >> >> The issue is when we try to sign into Jabber from the current (old) >> domain, cisco-uds SRV is setup in old domain and tests resolve correctly. >> >> When we try to sign into Jabber I get the 'Cannot open page, try again >> later' >> >> If I try and change to manual sign in, it never prompts with username and >> password only the service discovery prompt. >> >> Anyone seen this message before? >> >> >> >> _______________________________________________ >> cisco-voip mailing list >> cisco-voip@puck.nether.net >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >> >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip