We used to get the 7900s out of the box with four digit extensions on them sometimes that I assumed was from some sort of QA or testing
From: Lelio Fulgenzi <le...@uoguelph.ca> Sent: Tuesday, February 18, 2020 4:18 PM To: Pawlowski, Adam <aj...@buffalo.edu>; voyp list, cisco-voip (cisco-voip@puck.nether.net) <cisco-voip@puck.nether.net> Subject: RE: 7832 out of the box - needs to be reset to register Interesting. Well, it was in a Cisco box with tape that I had to cut open. Do you think it could have been a refurb? Yikes. From: Pawlowski, Adam <aj...@buffalo.edu<mailto:aj...@buffalo.edu>> Sent: Tuesday, February 18, 2020 4:16 PM To: Lelio Fulgenzi <le...@uoguelph.ca<mailto:le...@uoguelph.ca>>; voyp list, cisco-voip (cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>) <cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> Subject: RE: 7832 out of the box - needs to be reset to register Did it come out of the box not actually brand new with an ITL / CTL on it? From: cisco-voip <cisco-voip-boun...@puck.nether.net<mailto:cisco-voip-boun...@puck.nether.net>> On Behalf Of Lelio Fulgenzi Sent: Tuesday, February 18, 2020 4:09 PM To: voyp list, cisco-voip (cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>) <cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> Subject: [cisco-voip] 7832 out of the box - needs to be reset to register Any particular reason that I have to reset all settings on a 7832 before it registers? Never seen that before.
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip