Nice to see the examples and explanations - thank you! I really like the naming structure to allow simple a show command to pull everything related to one side of the call flow. URI matching broke down in UCCE environments as uri match overrides all other matching. I needed to match some ingress numbers from the ITSP to apply CVP .tcl scripts too and wasn’t able to when matching all inbound from ITSP via URI. So the config gets a bit longer in UCCE environments due to this. I ended up using e164-pattern-maps as another means of collapsing dial-peers, with uri match for calls from CUCM, and also server-groups to reduce outbound peers. Based on the configs from Brian and Anthony, you wouldn’t need e164-pattern-maps in those environments. Curious what direction others have taken to simplify dial-peers with UCCE in play.
Loren On Jun 16, 2020, at 10:55 AM, Anthony Holloway <avholloway+cisco-v...@gmail.com> wrote: Sorry, transmission failed. Try disabling NSF and re-sending. Back to the point of ABC123, it would be so nice if we could add comments to the show run. Second best is to keep a commented copy of the config off box in your documentation repository. On Mon, Jun 15, 2020 at 11:31 PM Brian Meade <bmead...@vt.edu<mailto:bmead...@vt.edu>> wrote: Anthony, I like the config. Definitely is nice to have some standardization on the dial-peer tags. I've usually done all my inbound dial-peers in the 1XX range but have gone outside of that lately with separating inbound ITSP and inbound CUCM dial-peers to make them more obvious but I like the idea of having more structure like yours. Using the destination-pattern ABC123 is a great idea to show that's not used as mentioned before. I try to always use voice-class codec for every dial-peer even if I've only got 1 codec configured there just to make it easier to change if ever needed but that was in the past when I had separate local/long distance/911/international/10-digit dial-peers. Simplifying it down to a single inbound/outbound dial-peer with the ITSP makes it a toss-up if that helps anymore. I've tried to keep KPML on my ITSP facing dial-peers just in case they happen to support it. I've found some say they don't but actually do use it if you advertise it. No harm in advertising it from our side. I like the aliases you've got there as well. I feel like I'm always on some random customer's box so not sure I'd remember to always put them in first but definitely nice to have when you make the full CUBE config. Looks like all you're missing is your fax config! I can fax that over to you! :) On Fri, Jun 12, 2020 at 8:53 PM Anthony Holloway <avholloway+cisco-v...@gmail.com<mailto:avholloway%2bcisco-v...@gmail.com>> wrote: All great points, thanks for taking the time to respond. The only one I think that I need to reply to is the DPG and destination-pattern one. I was actually troubleshooting a customer CUBE wherein this exact scenario was in place and the only negative was getting options to work. Otherwise, it was routing the call just fine. Granted, I couldn't tell you what version that was, as it was like a year or so ago, but either way, I always put a destination-pattern on because you need one for options to function. I guess I could reply to one more, and that has to do with tweaking retries from 6 to 2 AND using options. Why stick to one, when you can do both? Here's the one I use which I said was very similar to yours. The first thing to note is the numeric structure of my tags. 1000 series numbers are the ITSP side 2000 series numbers are the CUCM side I would expand this to 3000, 4000, etc., for additional integrations like PRIs, FXO, second ITSP, second PBX, etc. Most I ever had was 6 integrations into a single CUBE i think. The second digit is 1 for incoming and 2 for outgoing. The 4rd and fourth digit are generally not used, unless I need additional dial-peers for the same peer and direction, but doing something slightly different. Most I ever used was like 15 i think. E.g., 2215 But that was not using IP addresses in the matching and DPGs, that was using phone number matching, and I was using steering codes. This numbering structure allows me to do something like this: show run | section 12.. Which would then show me the following all at once: URI, Server Group, Profile and Dial Peers all pertaining to the outgoing ITSP leg. Also, in this example, we pass +E164 through the gateway bi-directionally, so no digit manip needed. voice class uri 1100 sip host ipv4:8.8.8.8 host ipv4:9.9.9.9 ! voice class server-group 1200 description ITSP Peers ipv4 8.8.8.8 preference 1 ipv4 9.9.9.9 preference 2 ! voice class sip-options-keepalive 1200 description ITSP Peers (Intentionally Left Blank) ! voice class uri 2100 sip host ipv4:10.1.1.2 host ipv4:10.1.1.3 ! voice class server-group 2200 description CUCM Nodes ipv4 10.1.1.2 preference 1 ipv4 10.1.1.3 preference 2 ! voice class sip-options-keepalive 2200 description CUCM Nodes (Intentionally Left Blank) ! voice class dpg 1200 dial-peer 1200 ! voice class dpg 2200 dial-peer 2200 ! dial-peer voice 1100 voip description Incoming ITSP Call Leg session protocol sipv2 incoming uri via 1100 destination dpg 2200 dtmf-relay rtp-nte ; ITSP only supports one dtmf relay codec g711ulaw ; ITSP only supports one codec ip qos dscp cs3 signaling no vad ! dial-peer voice 1200 voip description Outgoing ITSP Call Leg destination-pattern ABC123 session protocol sipv2 session server-group 1200 voice-class sip options-keepalive profile 1200 dtmf-relay rtp-nte codec g711ulaw ip qos dscp cs3 signaling no vad ! dial-peer voice 2100 voip description Incoming CUCM Call Leg session protocol sipv2 incoming uri via 2100 destination dpg 1200 dtmf-relay sip-kpml rtp-nte ; we support both in- and out-of-band internally and cube interworks dtmf codec g711ulaw ip qos dscp cs3 signaling no vad ! dial-peer voice 2200 voip description Outgoing CUCM Call Leg session protocol sipv2 session server-group 2200 destination-pattern ABC123 voice-class sip options-keepalive profile 2200 dtmf-relay sip-kpml rtp-nte codec g711ulaw ip qos dscp cs3 signaling no vad ! ! a little something extra here at the end alias exec attra show call active voice | in PeerAddr|PeerId|RemoteS|RemoteM|Dtmf|Coder|VAD alias exec attrh show call history voice | in PeerAddr|PeerId|RemoteS|RemoteM|Dtmf|Coder|VAD On Fri, Jun 12, 2020 at 6:36 PM Brian Meade <bmead...@vt.edu<mailto:bmead...@vt.edu>> wrote: Anthony, Thanks for the feedback. I'll definitely take a look at yours as well. Here's some answers on mine: 1. While I like that you can give a uri profile a name like ISP, I much prefer to stick with numbers, since for most things, you must use numbers when naming, so this keeps it consistent. So I usually replace this with the name of the actual SIP carrier. This seems to make it easier for customers to understand but I understand so many other things are number tags only. 2. I don't specify the port in my server groups, since 5060 is default, but I can see how it might help be more explicit for some people Yea, I've never tried it without specifying the port. I've got a lot of SIP carriers with weird SIP ports so making it stand out in the template helps to know where to change this. 3. Speaking of being explicit though, if that is your intention, I would recommend pref 1 and pref 2, instead of implied pref 0 and pref 1 That's a good idea. I actually exported this from a customer not realizing what it looks like when I use pref 0 and 1. Making it 1 and 2 would make that look cleaner. 4. Why didn't you should your translation profiles and rules too? These seem to be so customer/SIP carrier specific that I didn't think it was worth it. My most recent one had 80 rules in it because the carrier really cares about 10-digit/11-digit calling for the local area code. So we actually had to split it up for different NPA-NXX whether or not we added a 1. 5. I don't specify UDP as the transport, since it's the default, but again, being explicit doesn't hurt anything I also make UDP my default but it is nice to have it called out in a template so people know where to change it if needed. 6. I like the extra dtmf on there. too many configs are limited to rtp-nte only and mtps are being invoked for every call to UCCX as one example Yea, I always add both to make sure we never have to pull in an MTP. I'm not aware of a way to do this globally but would be nice. 7. Why do you drop your fax rate down from 14400 to 9600 as a standard? I might learn something here, as faxing is not my strongest area. I'm always debugging faxing it seems like. Disabling ECM and reducing speed to 9600 has seemed to help a lot over the years. It's slower but seems to work more reliably with every source/destination fax device. And people don't expect their fax to send quickly anyways. 8. Since you're doing DPGs, you don't need the destination-pattern .T command on the outbound DPs. It seems like IOS-XE will show a dial-peer as down and skip it if there is no destination-pattern configured. This looks to be called out as explicitely required here even though it isn't used- https://cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/multiple-outbound-dial-peer.html Using something like ABC123 for the destination-pattern may make more sense to not confuse anyone. Good call. 9a. Why are you not doing sip options ping? I would, and in which case you need a voice class sip options-keepalive profile<https://community.cisco.com/t5/telepresence-and-video/sip-options-ping-and-session-server-group-on-dial-peer/td-p/2994584> since you're using server groups. I've never been a fan of SIP Options ping. I've always used SIP timers for failover instead. I guess I've had a few outages where waiting for Options Ping to come back up after we fixed the underlying issue added additional delay. For monitoring purposes though, it probably is a good idea to get back into doing that for customers where we're monitoring their CUBEs. 9b. Also, if you do end up turning on options, you do in fact need a destination-pattern command, and in which case, since it's not being used for call routing, I just use like ABC123 as the pattern to ensure it never can be used, but also, mildly clear it's not supposed to be used I like that idea and referenced it in 8 above. On Fri, Jun 12, 2020 at 6:29 PM Anthony Holloway <avholloway+cisco-v...@gmail.com<mailto:avholloway%2bcisco-v...@gmail.com>> wrote: Brian, Nice and clean, I like it! Very similar to what I do. I'd like to comment/question yours a bit. 1. While I like that you can give a uri profile a name like ISP, I much prefer to stick with numbers, since for most things, you must use numbers when naming, so this keeps it consistent. 2. I don't specify the port in my server groups, since 5060 is default, but I can see how it might help be more explicit for some people 3. Speaking of being explicit though, if that is your intention, I would recommend pref 1 and pref 2, instead of implied pref 0 and pref 1 4. Why didn't you should your translation profiles and rules too? 5. I don't specify UDP as the transport, since it's the default, but again, being explicit doesn't hurt anything 6. I like the extra dtmf on there. too many configs are limited to rtp-nte only and mtps are being invoked for every call to UCCX as one example 7. Why do you drop your fax rate down from 14400 to 9600 as a standard? I might learn something here, as faxing is not my strongest area. 8. Since you're doing DPGs, you don't need the destination-pattern .T command on the outbound DPs. 9a. Why are you not doing sip options ping? I would, and in which case you need a voice class sip options-keepalive profile<https://community.cisco.com/t5/telepresence-and-video/sip-options-ping-and-session-server-group-on-dial-peer/td-p/2994584> since you're using server groups. 9b. Also, if you do end up turning on options, you do in fact need a destination-pattern command, and in which case, since it's not being used for call routing, I just use like ABC123 as the pattern to ensure it never can be used, but also, mildly clear it's not supposed to be used I'll post a config as well, in a bit, and please feel free to comment/question mine. On Fri, Jun 12, 2020 at 3:20 PM Brian Meade <bmead...@vt.edu<mailto:bmead...@vt.edu>> wrote: I've been trying to make a standardized CUBE configuration using a lot of the newer features like dial-peer groups. This is what I have now. It's an inbound dial-peer for CUCM matching the CUCM IP's via Via header. Then an inbound dial-peer for the ISP. Then an outbound dial-peer to CUCM and an outbound dial-peer to the ISP. If you have more IP's for the ISP or CUCM, you can easily add them. destination-pattern .T is not used at all due to using dial-peer group matching. This doesn't account for bindings that must be done per dial-peer. It also doesn't show translation-profiles/rules. This gives you 4 total dial-peers to match any number. If it comes in from CUCM, it will route to the SIP carrier. If it comes in from the SIP carrier, it will route to CUCM. voice class uri ISP sip host ipv4:8.8.8.8 voice class uri CUCM sip host ipv4:192.168.100.100 host ipv4:192.168.100.200 voice class server-group 100 ipv4 8.8.8.8 port 5060 voice class server-group 200 ipv4 192.168.100.100 port 5060 ipv4 192.168.100.200 port 5060 preference 1 voice class dpg 100 voice class dpg 200 dial-peer voice 100 voip description Incoming Dial-peer from ISP translation-profile incoming ISPInbound session protocol sipv2 session transport udp destination dpg 200 incoming uri via ISP voice-class codec 1 dtmf-relay rtp-nte sip-kpml fax-relay ecm disable fax rate 9600 dial-peer voice 200 voip description Incoming Dial-peer from CUCM session protocol sipv2 destination dpg 100 incoming uri via CUCM voice-class codec 1 dtmf-relay rtp-nte sip-kpml fax-relay ecm disable fax rate 9600 dial-peer voice 300 voip description Outbound to ISP translation-profile outgoing ISPOutbound destination-pattern .T session protocol sipv2 session transport udp session server-group 100 voice-class codec 1 dtmf-relay rtp-nte sip-kpml fax-relay ecm disable fax rate 9600 dial-peer voice 400 voip description Outbound to CUCM destination-pattern .T session protocol sipv2 session server-group 200 voice-class codec 1 dtmf-relay rtp-nte sip-kpml fax-relay ecm disable fax rate 9600 voice class dpg 100 dial-peer 300 voice class dpg 200 dial-peer 400 On Fri, Jun 12, 2020 at 3:12 PM JASON BURWELL via cisco-voip <cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> wrote: Does anyone have a good, straightforward reference doc to configuring CUBE dial peers? I have what I would have thought should be a fairly basic config but I’m having trouble getting everything to work properly. I’ve had some assistance but it seems like a whole lot of configuration to do what little I really need to do. Basically, I just need to send whatever comes from CUCM- either 10, 11 or 3 digits in the SIP invite for outbound and for inbound calls the provider sends me 10 digits in the invite, I just need to strip off the first 6 and send the last 4 to CUCM to route. I have a lot of adding and stripping digits going on between CUCM and CUBE to make this work. Just trying to find reference docs to see if any of this can be cleaned up. Thanks _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip _______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip