Gotta make sure it's extra hidden! On Thu, Jul 30, 2020 at 2:07 PM Anthony Holloway < avholloway+cisco-v...@gmail.com> wrote:
> I agree with you Brian, so then, why do so many people type the > command address-hiding in to their CUBE configuration? It just baffles me. > > On Wed, Jul 29, 2020 at 1:36 PM Brian Meade <bmead...@vt.edu> wrote: > >> Yea, CUBE is really just any config in which it's IP to IP on both sides >> of the router. CME with a SIP or SCCP phone and a VoIP dial-peer to a SIP >> carrier would be flow-through/address-hiding by default just like any VoIP >> dial-peer by default. >> >> On Wed, Jul 29, 2020 at 4:13 AM Gerence Guan <cisco.g...@gmail.com> >> wrote: >> >>> Hi all >>> >>> If using Cisco SIP IP phone on CME which terminates the SIP trunk from >>> service provider SBC, will it be media flow through by default? Can CME do >>> the IP address hiding between the voice vlan and service provider, like >>> what CUBE does? >>> >>> Best Regards, >>> Guan >>> _______________________________________________ >>> cisco-voip mailing list >>> cisco-voip@puck.nether.net >>> https://puck.nether.net/mailman/listinfo/cisco-voip >>> >> _______________________________________________ >> cisco-voip mailing list >> cisco-voip@puck.nether.net >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip