I need to find it, but of course can't right now, but I swear this is in the ER 
documentation somewhere, some version, that the system must be re-installed if 
it shuts down unexpectedly. Outside of this message.

I got called out on it by TAC, and they have documentation way preceding that 
message appearing visibly to point out where unexpected shutdowns have occurred.

There was a back and forth in the community on this, with a lot of people more 
interesting in making the message go away than trying to figure out if the 
system was okay or rebuild it.
I guess in some places it is normal to operate the infrastructure on car 
batteries or what have you. I really must be missing something as this feels 
like the old "put tape over the check engine light" .

Same thing I said there - personally, rebuild the thing when you can on your 
time table, instead of having it fail later, or during an upgrade.
CER seems to be the easiest thing to re-install - if you have exports you can 
replace the system functionality rather quickly even when DRF backups are no 
good.

Adam

From: cisco-voip <cisco-voip-boun...@puck.nether.net> On Behalf Of Lelio 
Fulgenzi
Sent: Tuesday, February 22, 2022 3:07 PM
To: Jonathan Charles <jonv...@gmail.com>; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Fun message on CER after power outage...

Yes - those warnings were making their way around another forum. It all has to 
do with reviewing the log files for a corresponding manual shutdown for any 
bootup sequences.

There is a fix (?) for the core apps found here. Normally these should work on 
CER but it's not listed. Not sure why.

https://www.cisco.com/web/software/286319173/139477/ciscocm.add_utils_ungraceful_warn_disable_v1.0.cop-README.pdf<https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.cisco.com%2Fweb%2Fsoftware%2F286319173%2F139477%2Fciscocm.add_utils_ungraceful_warn_disable_v1.0.cop-README.pdf&data=04%7C01%7Cajp26%40buffalo.edu%7C859cdfac22204a281abb08d9f63ee459%7C96464a8af8ed40b199e25f6b50a20250%7C0%7C0%7C637811573460286650%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=oEDfvBpF7svugCuHW%2B7dFkjMp7ECrAioYjVPabG8%2Bng%3D&reserved=0>

>From the readme (above):

The fix is included natively in 12.5.1SU6 (12.5.1.16900-x) and higher and 14SU2 
(14.0.1.12900-x) and higher.

Note: I don't think this fixes the issue, just removes the warning. If TAC 
reviews the logs and finds an ungraceful shutdown, they can start asking you to 
rebuild.

PS I don't see why a system can't recover without a rebuild either.

From: cisco-voip 
<cisco-voip-boun...@puck.nether.net<mailto:cisco-voip-boun...@puck.nether.net>> 
On Behalf Of Jonathan Charles
Sent: Tuesday, February 22, 2022 2:58 PM
To: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>
Subject: [cisco-voip] Fun message on CER after power outage...

CAUTION: This email originated from outside of the University of Guelph. Do not 
click links or open attachments unless you recognize the sender and know the 
content is safe. If in doubt, forward suspicious emails to 
ith...@uoguelph.ca<mailto:ith...@uoguelph.ca>

Only on the CLI...

WARNING: Ungraceful shutdown detected - A rebuild of this node is highly 
recommended to ensure no negative impact(such as configuration or file system 
corruption). For rebuild instructions, see the installation guide.

The bugs suggest it should only be on 12.5 and early... this is on CER 14...

Any recommendations? This seems a bit extreme...

The system appears to be working normally.



Jonathan
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to