I am seeing H.225 RAS messages being sent and not replied to on both E's... all UDP 1719...
My firewall guys say they see no port 1719 traffic, but the pcaps show 1719... Joy. Jonathan On Fri, May 13, 2022 at 9:11 AM Adam Pawlowski <aj...@buffalo.edu> wrote: > We ran into something similar in the past where things get generated in > the background but aren’t visible in the GUI. > > > > Traversal zones that allocate ports for disabled protocols, but then throw > an alarm about port conflicts as they’re configured. > > > > From what I can tell, LocalZone should have been a zone in VCS land, but > has since disappeared from Expressway. It may be floating in the background > somewhere and may be worth a look through the xapi to see if it’s visible > and get poked. > > > > *Adam Pawlowski* > > Network Engineer | Network and Communication Services > > University at Buffalo Information Technology (UBIT) > > 243 Computing Center, Buffalo, NY 14260 > > [image: contact_line] > > > > *From:* cisco-voip <cisco-voip-boun...@puck.nether.net> *On Behalf Of > *Jonathan > Charles > *Sent:* Thursday, May 12, 2022 5:10 PM > *To:* cisco-voip@puck.nether.net > *Subject:* [cisco-voip] Expressway Clustering... > > > > Howdy! > > > > We are seeing an error on our Expressway E nodes right after we form a > cluster. > > The cluster is up and fully operational, however, we get: > > > > Peer Not Responding > > A peer address for the LocalZone local zone is down and unreachable. > > > > It then tells you to check the zones page and verify the failing peer > address... > > > > There are no zones configured, as of yet... just the DefaultZone and it > has no option for peers to be configured. > > > > The LocalZone also has no peer configuration as an option. > > > > Any ideas? > > > > > > Thanks! > > > > > > Jonathan >
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
