|
Sounds like the IOS is not there and the config
register is set to ignore break on book. Pull the chips...
Couldn't find the original post, so please ignore
me if I have got the wrong end of the problem...
This has gotta be a two
part problem... One- you have corrupted IOS in FLASH & your terminal
emulator or keyboard mapping is not set so the correct signal is being sent to
interrupt the boot processes. Or... thirdly- something hardware is
screwed. Did you just replace any memory, boot ROM's, etc... I
have seen this before, when I replaced FLASH in non-compatable
increments...
Very
Interested...
Phil
----- Original Message -----
Sent: Thursday, May 04, 2000 9:53 AM
Subject: Wake up !
> hello people
>
> just have a
cisco 25** router. Connected via Hyperterminal in Windows 98,
> all
settings seem correct as they work with other routers.
> It tells me
that no valid image can be found in flash. BUT I cant seem to
> get it
to boot in rommon mode. It wont let me hit BREAK or CTRL-BREAK
>
etc...i can see an error message and even a rommon prompt...but i cant type
> anything.
> config works for another 2500
>
>
>
> any help much appreciated
>
>
________________________________________________________________________
>
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
___________________________________
> FAQ, list archives, and
subscription info: http://www.groupstudy.com
> Posting
Guidelines: http://www.groupstudy.com/list/guide.html
|
