Quoting skt <[EMAIL PROTECTED]>:
> Hi,
>
>
> I have recently added 8 mb of flash to my 4000 router but when it boots it comes to
>router<boot> prompt..
> can any one give some info
>
>
It looks like it's not finding the image
to load. I don't remember if the
command to tell it where the image is -
is available at the ROMMON prompt or not
but you could try it.
First check to see if you have an image
in flash, and what it's name is.
sh flash
Then set it to boot to that image. I think
it's like this :
boot system flash <name of flash file here>
If that fails you could reload the flash
from a tftp server.
You might also check the config-register
setting. Check that with the sh ver
command.
It should be set to 0x2102
HTH,
kelly
> thanks in adv........
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
