Hi Guys ,
I need some from you for following problem I am facing at one customer
router . It is configured for point to point ISDN dial on demand . Whenever
I start dialing it satrts dialing , connects but after few second it
reboots. I am getting following error message on screen . To check the
dialing and ISDN status I am running some debug commands like debug isdn ,
dialer events etc . The error is as follows :
00:05:03: %PQUICC-1-TOOSMALL: PQUICC(0/0), packet was less than 2 bytes
Cisco1720#
Cisco1720#
Cisco1720#
Cisco1720#
Cisco1720#
Cisco1720#
Cisco1720#de
Cisco1720#deb*** Unexpected Console FIFO timeout interrupt ***
PC = 0xfff03e64, Vector = 0x500, SP = 0x80722064
*** System received a SegV exception ***
signal= 0xb, code= 0x1200, context= 0x80720e68
PC = 0x8000e1d0, Vector = 0x1200, SP = 0x807f3820
System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C1700 platform with 16384 Kbytes of mto
00:04:45: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 0403228565
Also , What does one means by " no end-to-end isdn " error. Sometime I get
the same while connecting to some other sites . Will you please think on it
and reply ?..
Thanks in advance .
Hi , Wipro & ex-Wipro guys ..please scratch your heads and send me some
solution on it .
Regards
Chandrakant
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
