tan, it can be done. use dialer profile instead of dialer interface.
rgs,
lee
""Tan Choh Koon"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
>
> ISDN have 2 B channels, only one channels is use to sending data while
> another is idle, except it is configure for load balancing then both
> channels is used.
>
> It is possible to configure 1 B channel for dial to site A and oanother
> channel for site B ,without to have two physical ISDN line.
>
>
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
