Yes, they are basically static routes that you change the administrative
distance on, so that route is used only after a preferred route is no longer
available.
EF
-----Original Message-----
From: Jose Luis Canillas [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 24, 2000 2:57 PM
To: cisco
Subject: Re: IPX static routes
Anybody heard about floating static routes at all?
Jose Luis Canillas <[EMAIL PROTECTED]>@groupstudy.com on
23/05/2000 01:31:50 PM
Please respond to Jose Luis Canillas <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
To: cisco <[EMAIL PROTECTED]>
cc:
Subject: IPX static routes
Does anyone have any ideas about implementing static ipx routes between
two different routers? Or better yet, static routes based on availability
of destination interface/address (ip or ipx)
Thanks,
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
