username DIALIN password dialin
interface Loopback1
description AUX Modem Async1 Loopback
ip address 10.1.1.1 255.255.255.0
no ip directed-broadcast
!
interface Async65
ip unnumbered Loopback1
no ip directed-broadcast
encapsulation ppp
async mode dedicated
peer default ip address 10.1.1.2
no cdp enable
ppp authentication chap
line aux 0
password test
login
modem Dialin
modem autoconfigure type usr_sportster
transport input all
stopbits 1
speed 115200
flowcontrol hardware
Plug modem into aux port of router, and dial into router using Windows 95.
Router will assign you dialin PC 10.1.1.2, you should then be able to ping
10.1.1.1
Remember to use username: DIALIN password:dialin when dialing up.
Good luck
To see what line your aux port uses (in my case 65) type 'show line'
"Tan Choh Koon" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> Hi,
>
> Cisco online Dial soultion cookbook give a lot of DDR example on ISDN
and
> Asyn ports. Well do anyone here configure the syn/asyn port to do DDR and
> the port is connected to pstn dialup modem ? Please give some
configuration
> sample. Thanks.
>
>
> Asyn/syn serial interface is found on the WAN interface card ( WIC-1T) or
> some of Cisco 2500 series.
> Syn interface normally is used for leased line connection up to T1/E1. Asy
> interface is for modem dial up and limit to baud rate of 115kbbps
>
> Choh Koon, Tan
> CCNP
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
