Nevermind, I've discovered the answer. There used to be a model 1900C that
is half duplex only. That is the model most prevalent at our location.
That model is no longer available. The 1900 series now consists of the 1912
and 1924, both of which can do full duplex on their 10 meg ports. It turns
out that we have two of those, so I verified visually that the duplex
options is, in fact, in the port configuration section on the 1924 model.
> Cisco's website documentation says that full duplex operation is
available
> on all ethernet and fastethernet ports. However, I have several 1900s
and I
> cannot see how to turn on full duplex operation on ethernet ports. The
> fastethernet ports have an option under Port Configuration, but no such
> setting exists for the 10baseT ports. There is also no mention when you
> view the port whether it is running half or full, or if it
autonegotiating.
>
>
> Do only the new 1900 switches support full duplex on all ports?
>
>
>
>
>
> _______________________________________________________
> Get 100% FREE Internet Access powered by Excite
> Visit http://freelane.excite.com/freeisp
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_______________________________________________________
Get 100% FREE Internet Access powered by Excite
Visit http://freelane.excite.com/freeisp
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
