You should make shure that your encapsulation is the same as the telco that
you are leasing the line from. Cisco defaults to HDLC and that doesn't work
for GTE circuits. For GTE it's Encapsulation frame-relay ietf, and lmi type
is ansi.
"Jorge Rodriguez" <[EMAIL PROTECTED]> wrote in message
383598330.959176677065.JavaMail.root@web192-iw">news:383598330.959176677065.JavaMail.root@web192-iw...
> Let me ask you, does that serial link was ever working properly before the
> pings ? or is it a new circuit install/configuration thing ?
>
> ------Original Message------
> From: "Nigel Samuel" <[EMAIL PROTECTED]>
> To: Andrew Larkins <[EMAIL PROTECTED]>, Abdullah Al Faruq
> <[EMAIL PROTECTED]>, Josh <[EMAIL PROTECTED]>
> Sent: May 24, 2000 7:52:43 AM GMT
> Subject: Re: cannot ping over frame relay
>
>
> Are the host gateways set? or does the routes have ip routing enable? any
> access-list?
>
> Nigel
>
> ----- Original Message -----
> From: Andrew Larkins <[EMAIL PROTECTED]>
> To: Abdullah Al Faruq <[EMAIL PROTECTED]>; Josh <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Wednesday, May 24, 2000 4:52 AM
> Subject: RE: cannot ping over frame relay
>
>
> >
> >
> > Andrew Larkins
> > Usko Communications
> > Tel: +2711 236-8000
> > Fax: +2711 236-8350
> > Cell: +2783-656-7214
> > Email: [EMAIL PROTECTED]
> >
> >
> > "This message may contain information which is confidential and subject
to
> > legal privilege. If you are not the intended recipient, you may not
> peruse,
> > use, disseminate, distribute or copy this message. If you have received
> > this message in error, please notify the sender immediately by email,
> > facsimile or telephone and return and/or destroy the original message."
> >
> > Are the DLCI's active????
> > If not then you need to map dlci's
> > Routing protocols and static routes??
> >
> > Better to see the config
> >
> > Josh wrote:
> >
> > > heres my setup.
> > >
> > > Host-----+R1+------+Frame Switch+------+R2+--------Host
> > >
> > > from r1 and r2 i can ping anywhere but from either host i am
> > > unable to ping anything except the local interface. any ideas?
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> Jorge Rodriguez /CCNA
> Network Analyst
> R&S Networks Inc
> 1112 Boylston Street
> Suite 222
> Boston, MA 02115
> 1-781-614-1294
> http://www.netwire.n3.net/
> ........................................................
> iWon.com http://www.iwon.com why wouldn't you?
> ........................................................
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
