I'd say look at Cisco's web pages to be sure, but I think it is number of
packets in queue, max size of queue allowable, and number of packets that
have been dropped by that queue.
I don't know if it is 'normal' to put telnet in the high priority queue, but
it probably won't hurt since telnet traffic usually so light it won't impact
any other applications.
>Dear all,
>
>I've configure a priority list, after the command show int s0, the
>following
>is displayed:
>
> Queueing strategy: priority-list 1
> Output queue: high 0/10/0, medium 0/40/0, normal 0/80/0, low 0/80/0
>
>what do the numbers means 0/10/0 ....etc?
>
>I've assign telnet to the high queue to prevent delay.
>default is normal.
>
>Thanks
>
>--
>Jacques Lee
>CCNA
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
