Yes. I have done the very thing with a Corebuilder 7000. The Corebuilder
just needs the LECS address of the CAT5000 and you can configure all the
LANE scenarios you need.
I put the LECS, LES/BUS'es on the CAT5000.
Simon Hopkins.
Mark Holloway wrote:
>
> If I have a Catalyst 5000 with an ATM blade and want to learn how to
> configure ATM, do I just need a switch that will run the LANE services? I
> pulled a 3Com Corebuilder 7000 off-line at work and these are capable of
> running the ATM LANE services. Since the CCIE R/S exam doesn't require the
> setup of the Lightstream switch, then any ATM LANE service device should be
> able to work?
>
> Regards,
> Mark
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
