Hello, I encountered this problem: 3640 BRI dials into AS5200. Link comes up for 3 or 4 seconds, then drops. Debug ppp authentication shows it passed authentication, debug isdn q931 shows the following, what does "invalid message for call state 10" mean? Thanks in advance. Jim 5d00h: ISDN BR0/0: Outgoing call id = 0x96D2 5d00h: ISDN BR0/0: Event: Call to 0015106511084 at 64 Kb/s 5d00h: ISDN BR0/0: TX -> SETUP pd = 8 callref = 0x4B 5d00h: Bearer Capability i = 0x8890 5d00h: Channel ID i = 0x83 5d00h: Called Party Number i = 0x80, '0015106511084' 5d00h: ISDN BR0/0: Ux_BadMsg(): Invalid Message for call state 10, call id 0x96D 0, call ref 0x49, event 0x1310 5d00h: ISDN BR0/0: RX <- SETUP_ACK pd = 8 callref = 0xCB 5d00h: Channel ID i = 0x8A 5d00h: ISDN BR0/0: received HOST_INFORMATION call_id 0x96D2.. 5d00h: ISDN BR0/0: Ux_BadMsg(): Invalid Message for call state 10, call id 0x96D 0, call ref 0x49, event 0x1320.. 5d00h: ISDN Event: dsl 0 call_id 0x96D2 B channel assigned by switch 1 ISDN BR0/0: RX <- ALERTING pd = 8 callref = 0xCB 5d00h: ISDN BR0/0: received HOST_ALERTING call_id 0x96D2 5d00h: ISDN BR0/0: RX <- CONNECT pd = 8 callref = 0xCB 5d00h: Connected Number i = 0x00C3 5d00h: ISDN BR0/0: received HOST_CONNECT call_id 0x96D2 5d00h: %LINK-3-UPDOWN: Interface BRI0/0:2, changed state to up 5d00h: %ISDN-6-CONNECT: Interface BRI0/0:2 is now connected to 0015106511084 5d00h: ISDN BR0/0: Event: Connected to 0015106511084 on B2 at 64 Kb/s 5d00h: ISDN BR0/0: TX -> CONNECT_ACK pd = 8 callref = 0x4B 5d00h: ISDN BR0/0: Ux_BadMsg(): Invalid Message for call state 10, call id 0x96D 0, call ref 0x49, event 0x1310. __________________________________________________ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/ ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]