where are the access lists for the route map??
Andrew Larkins
Usko Communications
Tel: +2711 236-8000
Fax: +2711 236-8350
Cell: +2783-656-7214
Email: [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal privilege. If you are not the intended recipient, you may not peruse,
use, disseminate, distribute or copy this message. If you have received
this message in error, please notify the sender immediately by email,
facsimile or telephone and return and/or destroy the original message."
-----Original Message-----
From: Eric Lam [mailto:[EMAIL PROTECTED]]
Sent: 30 May 2000 03:48
To: [EMAIL PROTECTED]
Subject: route-map ping problem
All,
After I using route-map to map the NAT pool, I can't ping from inside to
outside but other service are ok (e.g. www, telnet, ftp).
original config (no problem for ping)
ip nat pool test 192.168.115.219 192.168.115.220 netmask 255.255.255.224
ip nat inside source list 1 pool test overload
new config ( can't ping from inside net PC to outside)
ip nat pool test 192.168.115.219 192.168.115.220 netmask 255.255.255.224
ip nat inside source route-map to-test pool test overload
is there any reason for that ??
Pls help.
Thanks, Eric
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
