You may set the time on a cisco router. Clock set hh:mm:ss and then set
for daylight savings time using the clock summertime command sequence. Read
more about it here: watch the word wrap.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/sbook/ssysmg
t.htm#xtocid702416
you may also want to set up NTP someplace on your system to keep your router
clocks in synch.
HTH
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Olden Pieterse
Sent: Wednesday, May 31, 2000 2:17 AM
To: '[EMAIL PROTECTED]'
Subject: daylight savings time for isdn backup on 3600
Hi there gang
Can someone point me in the right direction with this plse ?
Where do you find it and where do you config it ?
Backup should not take place after a certain time , taking daylight savings
time into account .
It'll be greatly appreciated !
Thx
Olden Pieterse
Technical Consultant
Mobile : +27 82 410 8621
Office : +27 21 419 5505
MCP , CCNA
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]