Boot up the router -- go ctrl break like a mad man until you into rom mode .
there you can set the register . do this : o/r 0x2102 (enter), i (enter)
will reload .
- do that
- then get into enable mode to get to conf t
- config-register 0x2102
- and Ctrl-Z
Hope it helps
Cheers
Olden
-----Original Message-----
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: 01 June 2000 11:53
To: Cisco Mail List
Subject: Cisco 3660 config register setting _ HELP!! URGENT
Importance: High
I have loaded a newer image on the box, but have also changed the config
register to 0x2121 by mistake. The console display now comes up garbled. How
do I get this back to normal.???
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
