Tony,
A guy I knwo of has Teltone ISDN simulators for sell for around $1700 and below.
mailto:[EMAIL PROTECTED]
Tony Vendetti wrote:
> Well fellow cisco disciples (older meaning of students implied)
>
> I am being given the following equipment to work out a Lab design. The list
> below is what I have on site now. I know that some pieces are missing,
> specifically anything that will work with ATM or Gig E. IOS is not an issue,
> I have access to CCO and permission level to download anything I want.
>
> What pieces would you recommend ? I want to be sure I request equipment that
> will give me the most bang for the the buck widest possible (I do have to be
> reasonable) range for experimentation as I move towards the CCIE (maybe two
> years, i'm a slow learner).
>
> Here is the List of what I have now.
>
> Catayst 5500 with Sup III and 24 port 10/100 Blade AC Power
> Cisco 3810 (inc, FXX, FXS (3 ports each) Ethernet BRI and an Multifuntion T1
> mod
> serial sync ports)
> 2 - Cisco 3640 each equipped with : 2 Ethernet 2, Token Ring, 2 WIC 1T
> 2 - Cisco 2620 each equipped with : 1 WIC 1T , 2FXO, 2 FXS
> 2 - Cisco 2520 (Fixed Configs)
> 1 - Cisco 2513 (Fixed Configs)
> 1 - Cisco 2511 (Fixed Configs)
> 1 - Cisco 1750 ( Fixed Config)
>
> Also I have three NT servers, two Running IPX, One Linux server (Syslog), 13
> individual laptops (133Mhz) to use as user pcs. A laptop with Sniffer Pro is
> also included with each lab and two licenses for Sniffer, to run on remote
> Users for testsing and Troubleshooting.
>
> I am in process of picking up some older IBM TR Nics and 4 MAU's
>
> I also have one Cisco 2800 series hub.
>
> Now For the embarassing part. I hate to ask a question without you knowing
> I've thought about it.
> Below Is what I think would be my idea to complete this lab scenario.
>
> Begin with a Lightstream 1010 (4 OC-3 Ports) and two 2912MF-XL with OC-3 ATM
> Modules.
> I would add 4 2610 Cisco routers as a flexible addition, also acquiring 4
> each of the following modules for the 2600 series. 2 port serial (high), 1
> ort ISDN U, 1 Port ISDN BRI S/T, 1 port ethernet, 4 port ethernet (only 2),
> 4port ISDB BRI S/T, 1 port channelized T1 (Only 2)
>
> I would acquire the Adtran ISDN simulator.
>
> Now it's your turn tell me my loopholes and mistakes. What can I take out,
> and what should I add.
>
> By the way I am being given four BRI lines (actually two in Illinois and two
> in Indiana) So I can have separate locations and play with the local
> telcos. In the near future there will be between 4-8 more similiar labs
> across the USA, I get to be one of the first .
>
> Tony Vendetti
> CCNA,CCDA,RCDD, MCSE
>
> Tony Vendetti
> CCNA,CCDA,RCDD, MCSE
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
