You need a FR switch in between them, most Cisco routers can be config'ed to
act as FR switches. Search the list, there are many posts on how to do this.
HTH
--
John Hardman, MCSE+I, CCNA
ArrisTech/CCS-IS SysAdmin
"Cisco Wave" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear All,
> Is it possible to use a T1 as the physical layer, and
> configure frame relay over it (instead of something
> like HDLC) ?
> I want to know if we can run Frame Relay between two
> routers back to back without FR switches ?
> Or can and should one of the router be configured as a
> switch ?
> Thank you,
>
>
>
>
>
> =====
> We are NOT Cisco Inc.
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos -- now, 100 FREE prints!
> http://photos.yahoo.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
