Hi Brad
All gateways on the workstations are OK. The problem happen intermittently
where a workstation loses its connection to the remote proxy. I suspect some
kind of timeout on the remote proxy. It comes back by itself after a while.
Thanks
Rudi
----- Original Message -----
From: "Brad Ellis" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2000 2:23 PM
Subject: Re: ISDN problems
> check the default gateway on your workstations. make sure they are set to
> the router's e0
>
> -Brad
> ""BIKEMAN"" <[EMAIL PROTECTED]> wrote in message
> 004101bfcea6$8d75bde0$de53fea9@WIN98MAIN">news:004101bfcea6$8d75bde0$de53fea9@WIN98MAIN...
> Hi all
>
> Thank you for your help on the speed of the ISDN connection. Most
helpfull.
>
> I'm afraid that my woes continue - the link is working fine,
authenticated,
> can reach anything I want to, resolve to the DNS servers at the ISP, use
the
> ISP's proxy but occasionally for a few minutes the workstations using the
> link cant access anything. I can still ping the ISP from the router but
not
> from the workstations.
>
> I'm not really sure if this is a router problem or a result of using the
> remote proxy but here is the meat of my config:
>
>
> ip subnet-zero
> ip nat pool XXXXXX x.x.x.x x.x.x.x netmask x.x.x.x
> ip nat inside source list 1 pool xxxxxx overload
> no ip domain-lookup
> isdn switch-type basic-net3
> !
> interface Ethernet0
> ip address x.x.x.x x.x.x.x
> ip nat inside
> !
> interface BRI0
> description connected to Internet
> no ip address
> ip nat outside
> encapsulation ppp
> dialer rotary-group 1
> dialer-group 1
> no cdp enable
> !
> interface Dialer1
> description connected to Internet
> ip address x.x.x.x x.x.x.x
> ip nat outside
> encapsulation ppp
> no ip split-horizon
> dialer in-band
> dialer string xxxxxxxxx
> dialer hold-queue 10
> dialer-group 1
> no cdp enable
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer1
> ip route 0.0.0.0 0.0.0.0 x.x.x.x
> access-list 1 permit x.x.x.0 0.0.0.255
>
> All details that might identify the customer or compromise security should
> be gone.
>
> Let me know if you have any ideas.
>
> Thanks
>
> Rudi
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
