Hi,
The following is the config which I'm currently using. I'm not sure if I
should put an IP address for the Eth and TR LAN interfaces, and if the
'bridge irb' is necessary. Please comment.
Thanks.
Rgds,
KK
----------------------------------------------------------------------------
-------
!
no ip routing
!
source-bridge ring-group 10
source-bridge transparent 10 30 3 1
!
interface Ethernet0
ip address 172.20.42.203 255.255.255.0
no ip route-cache
bridge-group 1
!
interface TokenRing0
ip address 172.20.42.203 255.255.255.0
no ip route-cache
ring-speed 16
source-bridge 2 1 10
source-bridge spanning 7
!
bridge 1 protocol ieee
bridge 7 protocol ibm
!
> -----Original Message-----
> From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, June 07, 2000 9:49 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Source-Route Translational Bridging - Need Help!
>
> Kwokkeen,
>
> There are a few weird peices to make SRTLB work, especially if you are
> trying to bridge layer 3 protocols. Can you submit a copy of the configs
> and perhaps I can help you through it.
>
>
>
> -----Original Message-----
> From: Kwokkeen
> To: [EMAIL PROTECTED]
> Sent: 6/7/00 6:03 AM
> Subject: Source-Route Translational Bridging - Need Help!
>
> Hi all,
>
> I'm trying to connect a TR LAN to a Ethernet LAN via a router/bridge as
> part
> of a migration exercise. And the restriction is that both the LANs must
> utilise the same IP addressing subnet/space. I understand that
> source-route
> translational bridging is the way to do bridging between these two
> mixed-media interfaces but I can't get IP to work. Basically, a host in
> Ethernet LAN cannot ping to any host in the TR LAN and vice versa.
>
> I've found out that routable protocols cannot be bridged with SR/TLB.
> Is
> there a way around or to resolve this problem? Any help or suggestion
> is
> much appreciated.
>
> Thank you.
>
> Regards,
> Kwok Keen
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
