Okay, I'm going out of my freakin' mind!! I've been searching cisco's site
for over half an hour trying to find out how to configure ISL trunking over
fast etherchannel on a 7513 running 11.2(17). I thought you defined a
port-channel using "interface port-channel" and subinterfaces for the vlans,
and then placed the physical fast ethernet interfaces into the channel
group.
However, when I do "int ?" in config mode, I see no "port-channel". I do
see "vlan" but I can't find "interface vlan" in any command reference
anywhere, so I don't know what it does or how to configure it.
I'm getting very frustrated with cisco's stinking search engine. I searched
using the following search words: isl, trunk, vlan, fast etherchannel, 11.2,
7500, 7513, port channel, cookbook, configuring...
All to no avail. I used many combinations of the above and never found what
I was looking for. Sure, if we were running 12.0, I'd have all the
references I could handle! But 11.2?? nope, not that I could find...
any help would be greatly appreciated.
Thanks,
John Neiberger, CCNA/CCDA, search-impaired
_______________________________________________________
Get 100% FREE Internet Access powered by Excite
Visit http://freelane.excite.com/freeisp
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
