You cannot set the LMI type *on* a subinterface; you can set it on the
physical interface, or you can let it autosense.
-----Original Message-----
From: Omer Shommo [mailto:[EMAIL PROTECTED]]
Sent: Sunday, June 11, 2000 4:05 PM
To: Cisco Group Study
Subject: FR lmi-type and subinterfaces
Hello,
I remember something that says I cannot configure LMI type If subinterfaces
are used. Please let me know if this is true, I
might be wrong.
BTW lmi type is auto-detected if using Cisco IOS version 11.2 and above
Omer
_____________________________________________
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
http://www.netzero.net/download/index.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
*****************************************************************************
The information in this email is confidential and may be legally privileged.
It is intended solely for the addressee. Access to this email by anyone else
is unauthorized.
If you are not the intended recipient, any disclosure, copying, distribution
or any action taken or omitted to be taken in reliance on it, is prohibited
and may be unlawful. When addressed to our clients any opinions or advice
contained in this email are subject to the terms and conditions expressed in
the governing KPMG client engagement letter.
*****************************************************************************
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
