Are you thinking of IP (or IPX) accounting?
It needs to be enabled on the interface (from memory, 'ip accounting' or
something similar).
Then 'show ip accounting' will give number of bytes and packets for each
source/destination pair.
By default it will store up to 1024 (I think) source/dest pairs (this probably
varies by platform and IOS release), which means it won't chew up all your
memory with stats, but you can adjust that number.
JMcL
---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 16/06/2000 10:39
---------------------------
"Yeshpal Mair" <[EMAIL PROTECTED]> on 15/06/2000 15:32:40
Please respond to "Yeshpal Mair" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc: [EMAIL PROTECTED] (bcc: JENNY MCLEOD/NSO/CSDA)
Subject: Traffic output
Hi There,
While troubeshooting for load issue on our existing T1, I discovered a high
usage under tx/load and rx/load counters. But what I was trying to get was
and I can't remember the show <.....> command for the life of me which
displays the source, destination and I beileve the bytes count being used.
Basically giving me which ip address is talking the loudest.
Can someone help job my memory. Any insight in this matter will be
appreciated.
cheers,
/ym
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
