Look Here:
http://www.cisco.com/warp/public/793/access_dial/britobribackup.html
At 07:59 PM 6/20/00 +0800, Daniel Ma wrote:
>I am trying to backup an serial interface using Bri port. However I go
>through the BRI interface configruation commands, I could not find the
>command "backup interface"???? Can any one help me on how to configure it?
>And for Bri interface should I configure normal DDR? I am using one
>cisco4700M and one cisco2503, IOS 11.3.
>
>Thanks in advance.
>
>Daniel Ma
>Systems Engineer
>Enterprise Computing Unit
>Infonet Systems & Services Pte Ltd
>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
===========================================
Duncan Maccubbin | [EMAIL PROTECTED]
Senior Network Engineer
MCP+I,MCSE,CCNA,CCDA,CCNP
CapuNet, LLC - Corporate Internet Solutions
(301) 881-4900 x8039
===========================================
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
